lkml.org 
[lkml]   [2022]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: meson: Enable active coling using gpio-fan on Odroid N2/N2+
Hello Anand,

On Tue, Oct 18, 2022 at 9:53 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> Odroid N2/N2+ support active cooling via gpio-fan controller.
> Add fan controls and tip point for cpu and ddr thermal sensor
> on this boards.
In the schematics for board rev 0.6 [0] I cannot find any information
about a fan connector.
The schematics for board rev 0.3 [1] on the other hand document a PWM
based fan connector on page 16.
So now I am not sure whether your patch only applies to certain board
revisions, the schematics are incorrect, etc.

Can you please provide some details about the fan connector on
Odroid-N2/N2+ and which hardware revisions are supported (and which
aren't) by your patch?


Thank you!
Martin


[0] https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
[1] https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.3_20190117.pdf

\
 
 \ /
  Last update: 2022-10-18 23:18    [W:0.090 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site