lkml.org 
[lkml]   [2022]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 07/11] phy: qcom-qmp-combo: clean up power-down handling
Date
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index c21512b9ab52..7b434e2ee640 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -121,6 +121,7 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
[QPHY_PCS_STATUS] = 0x174,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
@@ -1991,13 +1992,8 @@ static int qmp_combo_com_init(struct qmp_phy *qphy)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);

- if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
- qphy_setbits(pcs,
- cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
- cfg->pwrdn_ctrl);
- else
- qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
- cfg->pwrdn_ctrl);
+ qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);

mutex_unlock(&qmp->phy_mutex);

@@ -2144,13 +2140,8 @@ static int qmp_combo_power_off(struct phy *phy)
qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);

/* Put PHY into POWER DOWN state: active low */
- if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
- cfg->pwrdn_ctrl);
- } else {
- qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
- cfg->pwrdn_ctrl);
- }
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
}

return 0;
--
2.37.3
\
 
 \ /
  Last update: 2022-10-17 08:51    [W:0.078 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site