lkml.org 
[lkml]   [2022]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] pinctrl: pinctrl-zynqmp: Revert output-enable and bias-high-impedance support
Date
Having support for output-enable and bias-high-impedance properties
causing system hang with older Xilinx ZynqMP Platform Management Firmware
because there is missing autodetection feature.
When this feature is implemented, support for these two properties should
bring back.

Sai Krishna Potthuri (2):
Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and
bias-high-impedance"
Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"

.../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ----
drivers/pinctrl/pinctrl-zynqmp.c | 9 ---------
2 files changed, 13 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2022-10-17 14:02    [W:0.081 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site