lkml.org 
[lkml]   [2022]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/3] bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs
On Sat, 15 Oct 2022 at 02:51, David Vernet <void@manifault.com> wrote:
>
> Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
> to the verifier that it should enforce that a BPF program passes it a
> "safe", trusted pointer. Currently, "safe" means that the pointer is
> either PTR_TO_CTX, or is refcounted. There may be cases, however, where
> the kernel passes a BPF program a safe / trusted pointer to an object
> that the BPF program wishes to use as a kptr, but because the object
> does not yet have a ref_obj_id from the perspective of the verifier, the
> program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
> kfunc.
>
> The solution is to expand the set of pointers that are considered
> trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
> with these pointers without getting rejected by the verifier.
>
> There is already a PTR_UNTRUSTED flag that is set in some scenarios,
> such as when a BPF program reads a kptr directly from a map
> without performing a bpf_kptr_xchg() call. These pointers of course can
> and should be rejected by the verifier. Unfortunately, however,
> PTR_UNTRUSTED does not cover all the cases for safety that need to
> be addressed to adequately protect kfuncs. Specifically, pointers
> obtained by a BPF program "walking" a struct are _not_ considered
> PTR_UNTRUSTED according to BPF. For example, say that we were to add a
> kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
> acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
> that a task was unsafe to pass to a kfunc, the verifier would mistakenly
> allow the following unsafe BPF program to be loaded:
>
> SEC("tp_btf/task_newtask")
> int BPF_PROG(unsafe_acquire_task,
> struct task_struct *task,
> u64 clone_flags)
> {
> struct task_struct *acquired, *nested;
>
> nested = task->last_wakee;
>
> /* Would not be rejected by the verifier. */
> acquired = bpf_task_acquire(nested);
> if (!acquired)
> return 0;
>
> bpf_task_release(acquired);
> return 0;
> }
>
> To address this, this patch defines a new type flag called PTR_NESTED
> which tracks whether a PTR_TO_BTF_ID pointer was retrieved from walking
> a struct. A pointer passed directly from the kernel begins with
> (PTR_NESTED & type) == 0, meaning of course that it is not nested. Any
> pointer received from walking that object, however, would inherit that
> flag and become a nested pointer.
>
> With that flag, this patch also updates btf_check_func_arg_match() to
> only flag a PTR_TO_BTF_ID object as requiring a refcount if it has any
> type modifiers (which of course includes both PTR_UNTRUSTED and
> PTR_NESTED). Otherwise, the pointer passes this check and continues
> onto the others in btf_check_func_arg_match().
>
> A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
> and then another patch will validate this feature by ensuring that the
> verifier rejects a kfunc invocation with a nested pointer.
>
> Signed-off-by: David Vernet <void@manifault.com>
> ---

Please tag the patches with [ PATCH bpf-next ... ] subject prefix.

> include/linux/bpf.h | 6 ++++++
> kernel/bpf/btf.c | 11 ++++++++++-
> kernel/bpf/verifier.c | 12 +++++++++++-
> tools/testing/selftests/bpf/verifier/calls.c | 4 ++--
> 4 files changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> index 9e7d46d16032..b624024edb4e 100644
> --- a/include/linux/bpf.h
> +++ b/include/linux/bpf.h
> @@ -457,6 +457,12 @@ enum bpf_type_flag {
> /* Size is known at compile time. */
> MEM_FIXED_SIZE = BIT(10 + BPF_BASE_TYPE_BITS),
>
> + /* PTR was obtained from walking a struct. This is used with
> + * PTR_TO_BTF_ID to determine whether the pointer is safe to pass to a
> + * kfunc with KF_TRUSTED_ARGS.
> + */
> + PTR_NESTED = BIT(11 + BPF_BASE_TYPE_BITS),
> +
> __BPF_TYPE_FLAG_MAX,
> __BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1,
> };
> diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
> index eba603cec2c5..3d7bad11b10b 100644
> --- a/kernel/bpf/btf.c
> +++ b/kernel/bpf/btf.c
> @@ -6333,8 +6333,17 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env,
> /* Check if argument must be a referenced pointer, args + i has
> * been verified to be a pointer (after skipping modifiers).
> * PTR_TO_CTX is ok without having non-zero ref_obj_id.
> + *
> + * All object pointers must be refcounted, other than:
> + * - PTR_TO_CTX
> + * - Trusted pointers (i.e. pointers with no type modifiers)
> */
> - if (is_kfunc && trusted_args && (obj_ptr && reg->type != PTR_TO_CTX) && !reg->ref_obj_id) {
> + if (is_kfunc &&
> + trusted_args &&
> + obj_ptr &&
> + base_type(reg->type) != PTR_TO_CTX &&
> + type_flag(reg->type) &&
> + !reg->ref_obj_id) {
> bpf_log(log, "R%d must be referenced\n", regno);
> return -EINVAL;
> }
> diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
> index 6f6d2d511c06..d16a08ca507b 100644
> --- a/kernel/bpf/verifier.c
> +++ b/kernel/bpf/verifier.c
> @@ -581,6 +581,8 @@ static const char *reg_type_str(struct bpf_verifier_env *env,
> strncpy(prefix, "user_", 32);
> if (type & MEM_PERCPU)
> strncpy(prefix, "percpu_", 32);
> + if (type & PTR_NESTED)
> + strncpy(prefix, "nested_", 32);
> if (type & PTR_UNTRUSTED)
> strncpy(prefix, "untrusted_", 32);
>

Since these are no longer exclusive, the code needs to be updated to
append strings to the prefix buffer.
Maybe just using snprintf with %s%s%s.. would be better, passing ""
when !(type & flag).

> @@ -4558,6 +4560,9 @@ static int check_ptr_to_btf_access(struct bpf_verifier_env *env,
> if (type_flag(reg->type) & PTR_UNTRUSTED)
> flag |= PTR_UNTRUSTED;
>
> + /* All pointers obtained by walking a struct are nested. */
> + flag |= PTR_NESTED;
> +

Instead of PTR_NESTED, how about PTR_WALK?

> if (atype == BPF_READ && value_regno >= 0)
> mark_btf_ld_reg(env, regs, value_regno, ret, reg->btf, btf_id, flag);
>
> @@ -5694,7 +5699,12 @@ static const struct bpf_reg_types scalar_types = { .types = { SCALAR_VALUE } };
> static const struct bpf_reg_types context_types = { .types = { PTR_TO_CTX } };
> static const struct bpf_reg_types alloc_mem_types = { .types = { PTR_TO_MEM | MEM_ALLOC } };
> static const struct bpf_reg_types const_map_ptr_types = { .types = { CONST_PTR_TO_MAP } };
> -static const struct bpf_reg_types btf_ptr_types = { .types = { PTR_TO_BTF_ID } };
> +static const struct bpf_reg_types btf_ptr_types = {
> + .types = {
> + PTR_TO_BTF_ID,
> + PTR_TO_BTF_ID | PTR_NESTED
> + },
> +};
> static const struct bpf_reg_types spin_lock_types = { .types = { PTR_TO_MAP_VALUE } };
> static const struct bpf_reg_types percpu_btf_ptr_types = { .types = { PTR_TO_BTF_ID | MEM_PERCPU } };
> static const struct bpf_reg_types func_ptr_types = { .types = { PTR_TO_FUNC } };
> diff --git a/tools/testing/selftests/bpf/verifier/calls.c b/tools/testing/selftests/bpf/verifier/calls.c
> index e1a937277b54..496c29b1a298 100644
> --- a/tools/testing/selftests/bpf/verifier/calls.c
> +++ b/tools/testing/selftests/bpf/verifier/calls.c
> @@ -181,7 +181,7 @@
> },
> .result_unpriv = REJECT,
> .result = REJECT,
> - .errstr = "negative offset ptr_ ptr R1 off=-4 disallowed",
> + .errstr = "negative offset nested_ptr_ ptr R1 off=-4 disallowed",
> },
> {
> "calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset",
> @@ -243,7 +243,7 @@
> },
> .result_unpriv = REJECT,
> .result = REJECT,
> - .errstr = "R1 must be referenced",
> + .errstr = "arg#0 pointer type STRUCT prog_test_ref_kfunc must point to scalar",
> },
> {
> "calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID",
> --
> 2.38.0
>

On Sat, 15 Oct 2022 at 02:51, David Vernet <void@manifault.com> wrote:
>
> Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
> to the verifier that it should enforce that a BPF program passes it a
> "safe", trusted pointer. Currently, "safe" means that the pointer is
> either PTR_TO_CTX, or is refcounted. There may be cases, however, where
> the kernel passes a BPF program a safe / trusted pointer to an object
> that the BPF program wishes to use as a kptr, but because the object
> does not yet have a ref_obj_id from the perspective of the verifier, the
> program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
> kfunc.
>
> The solution is to expand the set of pointers that are considered
> trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
> with these pointers without getting rejected by the verifier.
>
> There is already a PTR_UNTRUSTED flag that is set in some scenarios,
> such as when a BPF program reads a kptr directly from a map
> without performing a bpf_kptr_xchg() call. These pointers of course can
> and should be rejected by the verifier. Unfortunately, however,
> PTR_UNTRUSTED does not cover all the cases for safety that need to
> be addressed to adequately protect kfuncs. Specifically, pointers
> obtained by a BPF program "walking" a struct are _not_ considered
> PTR_UNTRUSTED according to BPF. For example, say that we were to add a
> kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
> acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
> that a task was unsafe to pass to a kfunc, the verifier would mistakenly
> allow the following unsafe BPF program to be loaded:
>
> SEC("tp_btf/task_newtask")
> int BPF_PROG(unsafe_acquire_task,
> struct task_struct *task,
> u64 clone_flags)
> {
> struct task_struct *acquired, *nested;
>
> nested = task->last_wakee;
>
> /* Would not be rejected by the verifier. */
> acquired = bpf_task_acquire(nested);
> if (!acquired)
> return 0;
>
> bpf_task_release(acquired);
> return 0;
> }
>
> To address this, this patch defines a new type flag called PTR_NESTED
> which tracks whether a PTR_TO_BTF_ID pointer was retrieved from walking
> a struct. A pointer passed directly from the kernel begins with
> (PTR_NESTED & type) == 0, meaning of course that it is not nested. Any
> pointer received from walking that object, however, would inherit that
> flag and become a nested pointer.
>
> With that flag, this patch also updates btf_check_func_arg_match() to
> only flag a PTR_TO_BTF_ID object as requiring a refcount if it has any
> type modifiers (which of course includes both PTR_UNTRUSTED and
> PTR_NESTED). Otherwise, the pointer passes this check and continues
> onto the others in btf_check_func_arg_match().
>
> A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
> and then another patch will validate this feature by ensuring that the
> verifier rejects a kfunc invocation with a nested pointer.
>
> Signed-off-by: David Vernet <void@manifault.com>
> ---
> include/linux/bpf.h | 6 ++++++
> kernel/bpf/btf.c | 11 ++++++++++-
> kernel/bpf/verifier.c | 12 +++++++++++-
> tools/testing/selftests/bpf/verifier/calls.c | 4 ++--
> 4 files changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> index 9e7d46d16032..b624024edb4e 100644
> --- a/include/linux/bpf.h
> +++ b/include/linux/bpf.h
> @@ -457,6 +457,12 @@ enum bpf_type_flag {
> /* Size is known at compile time. */
> MEM_FIXED_SIZE = BIT(10 + BPF_BASE_TYPE_BITS),
>
> + /* PTR was obtained from walking a struct. This is used with
> + * PTR_TO_BTF_ID to determine whether the pointer is safe to pass to a
> + * kfunc with KF_TRUSTED_ARGS.
> + */
> + PTR_NESTED = BIT(11 + BPF_BASE_TYPE_BITS),
> +
> __BPF_TYPE_FLAG_MAX,
> __BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1,
> };
> diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
> index eba603cec2c5..3d7bad11b10b 100644
> --- a/kernel/bpf/btf.c
> +++ b/kernel/bpf/btf.c
> @@ -6333,8 +6333,17 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env,
> /* Check if argument must be a referenced pointer, args + i has
> * been verified to be a pointer (after skipping modifiers).
> * PTR_TO_CTX is ok without having non-zero ref_obj_id.
> + *
> + * All object pointers must be refcounted, other than:
> + * - PTR_TO_CTX
> + * - Trusted pointers (i.e. pointers with no type modifiers)
> */
> - if (is_kfunc && trusted_args && (obj_ptr && reg->type != PTR_TO_CTX) && !reg->ref_obj_id) {
> + if (is_kfunc &&
> + trusted_args &&
> + obj_ptr &&
> + base_type(reg->type) != PTR_TO_CTX &&
> + type_flag(reg->type) &&
> + !reg->ref_obj_id) {
> bpf_log(log, "R%d must be referenced\n", regno);
> return -EINVAL;
> }
> diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
> index 6f6d2d511c06..d16a08ca507b 100644
> --- a/kernel/bpf/verifier.c
> +++ b/kernel/bpf/verifier.c
> @@ -581,6 +581,8 @@ static const char *reg_type_str(struct bpf_verifier_env *env,
> strncpy(prefix, "user_", 32);
> if (type & MEM_PERCPU)
> strncpy(prefix, "percpu_", 32);
> + if (type & PTR_NESTED)
> + strncpy(prefix, "nested_", 32);
> if (type & PTR_UNTRUSTED)
> strncpy(prefix, "untrusted_", 32);
>
> @@ -4558,6 +4560,9 @@ static int check_ptr_to_btf_access(struct bpf_verifier_env *env,
> if (type_flag(reg->type) & PTR_UNTRUSTED)
> flag |= PTR_UNTRUSTED;
>
> + /* All pointers obtained by walking a struct are nested. */
> + flag |= PTR_NESTED;
> +
> if (atype == BPF_READ && value_regno >= 0)
> mark_btf_ld_reg(env, regs, value_regno, ret, reg->btf, btf_id, flag);
>
> @@ -5694,7 +5699,12 @@ static const struct bpf_reg_types scalar_types = { .types = { SCALAR_VALUE } };
> static const struct bpf_reg_types context_types = { .types = { PTR_TO_CTX } };
> static const struct bpf_reg_types alloc_mem_types = { .types = { PTR_TO_MEM | MEM_ALLOC } };
> static const struct bpf_reg_types const_map_ptr_types = { .types = { CONST_PTR_TO_MAP } };
> -static const struct bpf_reg_types btf_ptr_types = { .types = { PTR_TO_BTF_ID } };
> +static const struct bpf_reg_types btf_ptr_types = {
> + .types = {
> + PTR_TO_BTF_ID,
> + PTR_TO_BTF_ID | PTR_NESTED
> + },
> +};

CI fails, two of those failures are from not updating
check_func_arg_reg_off for PTR_TO_BTF_ID | PTR_WALK, and the other one
is a crash because you didn't add to the list in convert_ctx_access
for PROBE_MEM based load fault handling.

The third issue is a bit more interesting:

; if (fib6_nh->fib_nh_gw_family) {
4375 58: (71) r1 = *(u8 *)(r9 +14)
4376 same insn cannot be used with different pointers

This is because one branch does:
fib6_nh = &rt->fib6_nh[0];
while the other does
fib6_nh = &nh->nh_info->fib6_nh;

So the load insn 58 in one path uses PTR_TO_BTF_ID and in the other
PTR_TO_BTF_ID | PTR_NESTED, so reg_type_mismatch bails on seeing src
!= prev.

I think it's ok to allow this, and we can probably do base_type(src)
!= base_type(prev) here. If the load was not permitted,
check_mem_access before this should have caught it. The check is
mostly to prevent doing stuff like PTR_TO_CTX in one path and
PTR_TO_BTF_ID in the other, because then the convert_ctx_access
handling would be totally incorrect for the load instruction.

Hopefully I'm not missing anything.

But please add some comments about this when updating this particular
check, it's very easy to forget all this later.

> [...]

\
 
 \ /
  Last update: 2022-10-18 03:33    [W:0.086 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site