lkml.org 
[lkml]   [2022]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/2] clk: qcom: Add SC8280XP display clock controller
From
Round 2 because the patch is too long for the mailing lists, I hope it 
is okay to strip out a bit of the patch

On 10/17/22 6:09 PM, Steev Klimaszewski wrote:
> Hi Bjorn,
>
> On 9/26/22 3:38 PM, Bjorn Andersson wrote:
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>>
>> The Qualcomm SC8280XP platform has two display clock controller
>> instances, add support for these. Duplication between the two
>> implementations is reduced by reusing any constant data between the two
>> sets of clock data.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
>> ---
>>
>> Changes since v1:
>> - Lowercased hex numbers
>> - Changed "DISP CC 0" in error print, to work for second dispcc as well.
>>
>>   drivers/clk/qcom/Kconfig           |    9 +
>>   drivers/clk/qcom/Makefile          |    1 +
>>   drivers/clk/qcom/dispcc-sc8280xp.c | 3218 ++++++++++++++++++++++++++++
>>   3 files changed, 3228 insertions(+)
>>   create mode 100644 drivers/clk/qcom/dispcc-sc8280xp.c
>>
Tested on Lenovo Thinkpad X13s

Tested-by: Steev Klimaszewski <steev@kali.org>

\
 
 \ /
  Last update: 2022-10-18 02:52    [W:0.082 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site