lkml.org 
[lkml]   [2022]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/3] riscv: dts: starfive: Add common DT for JH7100 based boards
Date
In preparation for adding initial device tree support for the StarFive
VisionFive board, which is similar with BeagleV Starlight, move most
of the content from jh7100-beaglev-starlight.dts to a new file, to be
shared between the two boards.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
.../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
...aglev-starlight.dts => jh7100-common.dtsi} | 3 -
2 files changed, 1 insertion(+), 155 deletions(-)
copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)

diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index f7a230110512..7cda3a89020a 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -5,160 +5,9 @@
*/

/dts-v1/;
-#include "jh7100.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+#include "jh7100-common.dtsi"

/ {
model = "BeagleV Starlight Beta";
compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
- aliases {
- serial0 = &uart3;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- timebase-frequency = <6250000>;
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x2 0x0>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-ack {
- gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_HEARTBEAT;
- linux,default-trigger = "heartbeat";
- label = "ack";
- };
- };
-};
-
-&gpio {
- i2c0_pins: i2c0-0 {
- i2c-pins {
- pinmux = <GPIOMUX(62, GPO_LOW,
- GPO_I2C0_PAD_SCK_OEN,
- GPI_I2C0_PAD_SCK_IN)>,
- <GPIOMUX(61, GPO_LOW,
- GPO_I2C0_PAD_SDA_OEN,
- GPI_I2C0_PAD_SDA_IN)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c1_pins: i2c1-0 {
- i2c-pins {
- pinmux = <GPIOMUX(47, GPO_LOW,
- GPO_I2C1_PAD_SCK_OEN,
- GPI_I2C1_PAD_SCK_IN)>,
- <GPIOMUX(48, GPO_LOW,
- GPO_I2C1_PAD_SDA_OEN,
- GPI_I2C1_PAD_SDA_IN)>;
- bias-pull-up;
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c2_pins: i2c2-0 {
- i2c-pins {
- pinmux = <GPIOMUX(60, GPO_LOW,
- GPO_I2C2_PAD_SCK_OEN,
- GPI_I2C2_PAD_SCK_IN)>,
- <GPIOMUX(59, GPO_LOW,
- GPO_I2C2_PAD_SDA_OEN,
- GPI_I2C2_PAD_SDA_IN)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- uart3_pins: uart3-0 {
- rx-pins {
- pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
- GPI_UART3_PAD_SIN)>;
- bias-pull-up;
- drive-strength = <14>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- tx-pins {
- pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
- GPO_ENABLE, GPI_NONE)>;
- bias-disable;
- drive-strength = <35>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-};
-
-&i2c0 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <500>;
- i2c-scl-falling-time-ns = <500>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- pmic@5e {
- compatible = "ti,tps65086";
- reg = <0x5e>;
- gpio-controller;
- #gpio-cells = <2>;
-
- regulators {
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <100>;
- i2c-scl-falling-time-ns = <100>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <500>;
- i2c-scl-falling-time-ns = <500>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&osc_sys {
- clock-frequency = <25000000>;
-};
-
-&osc_aud {
- clock-frequency = <27000000>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
- status = "okay";
};
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
similarity index 96%
copy from arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
copy to arch/riscv/boot/dts/starfive/jh7100-common.dtsi
index f7a230110512..b93ce351a90f 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi
@@ -11,9 +11,6 @@
#include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>

/ {
- model = "BeagleV Starlight Beta";
- compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
-
aliases {
serial0 = &uart3;
};
--
2.38.0
\
 
 \ /
  Last update: 2022-10-17 23:25    [W:0.077 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site