lkml.org 
[lkml]   [2022]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v5 04/34] ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schema
    Date
    DT schema expects TLMM pin configuration nodes to be named with
    '-state' suffix and their optional children with '-pins' suffix. Schema
    also requires 'function' property, so two nodes for the same gpio (mux
    and config) should be merged into one.

    Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    Reviewed-by: Bjorn Andersson <andersson@kernel.org>
    Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
    ---
    .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 45 +++++++------------
    1 file changed, 15 insertions(+), 30 deletions(-)

    diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
    index a4fa468a095f..ac8b4626ae9a 100644
    --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
    +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
    @@ -282,40 +282,25 @@ &remoteproc_mpss {
    };

    &tlmm {
    - pcie_ep_clkreq_default: pcie_ep_clkreq_default {
    - mux {
    - pins = "gpio56";
    - function = "pcie_clkreq";
    - };
    - config {
    - pins = "gpio56";
    - drive-strength = <2>;
    - bias-disable;
    - };
    + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
    + pins = "gpio56";
    + function = "pcie_clkreq";
    + drive-strength = <2>;
    + bias-disable;
    };

    - pcie_ep_perst_default: pcie_ep_perst_default {
    - mux {
    - pins = "gpio57";
    - function = "gpio";
    - };
    - config {
    - pins = "gpio57";
    - drive-strength = <2>;
    - bias-pull-down;
    - };
    + pcie_ep_perst_default: pcie-ep-perst-default-state {
    + pins = "gpio57";
    + function = "gpio";
    + drive-strength = <2>;
    + bias-pull-down;
    };

    - pcie_ep_wake_default: pcie_ep_wake_default {
    - mux {
    - pins = "gpio53";
    - function = "gpio";
    - };
    - config {
    - pins = "gpio53";
    - drive-strength = <2>;
    - bias-disable;
    - };
    + pcie_ep_wake_default: pcie-ep-wake-default-state {
    + pins = "gpio53";
    + function = "gpio";
    + drive-strength = <2>;
    + bias-disable;
    };
    };

    --
    2.34.1
    \
     
     \ /
      Last update: 2022-10-16 19:02    [W:3.945 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site