lkml.org 
[lkml]   [2022]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V7 6/7] remoteproc: imx_rproc: request mbox channel later
On Fri, Oct 14, 2022 at 11:10:36AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> It is possible that when remote processor crash, the communication
> channel will be broken with garbage value in mailbox, such as
> when Linux is issuing a message through mailbox, remote processor
> crashes, we need free & rebuild the mailbox channels to make sure
> no garbage value in mailbox channels.
>
> So move the request/free to start/stop for managing remote procesosr in
> Linux, move to attach/detach for remote processor is out of control of
> Linux.
>
> Previous, we just request mbox when attach for CM4 boot early before
> Linux, but if mbox defer probe, remoteproc core will do resource cleanup
> and corrupt resource table for later probe.
>
> So move request mbox ealier and still keep mbox request when attach
> for self recovery case, but keep a check when request/free mbox.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 39 ++++++++++++++++++++++++++++++++--
> 1 file changed, 37 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 917e6db39572..1183de84a4c0 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -84,6 +84,8 @@ struct imx_rproc_mem {
> #define ATT_CORE_MASK 0xffff
> #define ATT_CORE(I) BIT((I))
>
> +static int imx_rproc_xtr_mbox_init(struct rproc *rproc);
> +static void imx_rproc_free_mbox(struct rproc *rproc);
> static int imx_rproc_detach_pd(struct rproc *rproc);
>
> struct imx_rproc {
> @@ -357,6 +359,10 @@ static int imx_rproc_start(struct rproc *rproc)
> struct arm_smccc_res res;
> int ret;
>
> + ret = imx_rproc_xtr_mbox_init(rproc);
> + if (ret)
> + return ret;
> +
> switch (dcfg->method) {
> case IMX_RPROC_MMIO:
> ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> @@ -407,6 +413,8 @@ static int imx_rproc_stop(struct rproc *rproc)
>
> if (ret)
> dev_err(dev, "Failed to stop remote core\n");
> + else
> + imx_rproc_free_mbox(rproc);
>
> return ret;
> }
> @@ -592,6 +600,22 @@ static void imx_rproc_kick(struct rproc *rproc, int vqid)
>
> static int imx_rproc_attach(struct rproc *rproc)
> {
> + return imx_rproc_xtr_mbox_init(rproc);
> +}
> +
> +static int imx_rproc_detach(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + const struct imx_rproc_dcfg *dcfg = priv->dcfg;
> +
> + if (dcfg->method != IMX_RPROC_SCU_API)
> + return -EOPNOTSUPP;
> +
> + if (imx_sc_rm_is_resource_owned(priv->ipc_handle, priv->rsrc_id))
> + return -EOPNOTSUPP;
> +
> + imx_rproc_free_mbox(rproc);
> +
> return 0;
> }
>
> @@ -610,6 +634,7 @@ static struct resource_table *imx_rproc_get_loaded_rsc_table(struct rproc *rproc
> static const struct rproc_ops imx_rproc_ops = {
> .prepare = imx_rproc_prepare,
> .attach = imx_rproc_attach,
> + .detach = imx_rproc_detach,
> .start = imx_rproc_start,
> .stop = imx_rproc_stop,
> .kick = imx_rproc_kick,
> @@ -720,6 +745,9 @@ static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
> struct device *dev = priv->dev;
> struct mbox_client *cl;
>
> + if (priv->tx_ch && priv->rx_ch)
> + return 0;
> +

You did exactly the same things as in V6. I asked you why this is needed and
all you did is point me to the code in _probe(), which I can read on my own.

Again - why is this needed when we know it will be done in start() and attach()?


> if (!of_get_property(dev->of_node, "mbox-names", NULL))
> return 0;
>
> @@ -749,8 +777,15 @@ static void imx_rproc_free_mbox(struct rproc *rproc)
> {
> struct imx_rproc *priv = rproc->priv;
>
> - mbox_free_channel(priv->tx_ch);
> - mbox_free_channel(priv->rx_ch);
> + if (priv->tx_ch) {
> + mbox_free_channel(priv->tx_ch);
> + priv->tx_ch = NULL;
> + }
> +
> + if (priv->rx_ch) {
> + mbox_free_channel(priv->rx_ch);
> + priv->rx_ch = NULL;
> + }
> }
>
> static void imx_rproc_put_scu(struct rproc *rproc)
> --
> 2.37.1
>

\
 
 \ /
  Last update: 2022-10-14 19:50    [W:0.079 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site