lkml.org 
[lkml]   [2022]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] iommu/vt-d: Add sanity check to iommu_sva_bind_device()
On Fri, Oct 14, 2022 at 08:25:29AM -0700, Jerry Snitselaar wrote:
> On Fri, Oct 14, 2022 at 12:01:21PM +0100, Robin Murphy wrote:
> > On 2022-10-14 07:52, Jerry Snitselaar wrote:
> > > On Fri, Oct 14, 2022 at 10:22:21AM +0800, Baolu Lu wrote:
> > > > On 2022/10/14 10:10, Jerry Snitselaar wrote:
> > > > > On Fri, Oct 14, 2022 at 09:52:44AM +0800, Baolu Lu wrote:
> > > > > > On 2022/10/13 23:33, Jerry Snitselaar wrote:
> > > > > > > iommu_sva_bind_device() should only be called if
> > > > > > > iommu_dev_enable_feature() succeeded. There has been one case already
> > > > > > > where that hasn't been the case, which resulted in a null pointer
> > > > > > > deref in dev_iommu_ops(). To avoid that happening in the future if
> > > > > > > another driver makes that mistake, sanity check dev->iommu and
> > > > > > > dev->iommu->iommu_dev prior to calling dev_iommu_ops().
> > > > > > >
> > > > > > > Cc: Joerg Roedel<joro@8bytes.org>
> > > > > > > Cc: Will Deacon<will@kernel.org>
> > > > > > > Cc: Robin Murphy<robin.murphy@arm.com>
> > > > > > > Cc: Lu Baolu<baolu.lu@linux.intel.com>
> > > > > > > Signed-off-by: Jerry Snitselaar<jsnitsel@redhat.com>
> > > > > > > ---
> > > > > > > drivers/iommu/iommu.c | 10 +++++++++-
> > > > > > > 1 file changed, 9 insertions(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> > > > > > > index 4893c2429ca5..20ec75667529 100644
> > > > > > > --- a/drivers/iommu/iommu.c
> > > > > > > +++ b/drivers/iommu/iommu.c
> > > > > > > @@ -2746,7 +2746,15 @@ iommu_sva_bind_device(struct device *dev, struct mm_struct *mm, void *drvdata)
> > > > > > > {
> > > > > > > struct iommu_group *group;
> > > > > > > struct iommu_sva *handle = ERR_PTR(-EINVAL);
> > > > > > > - const struct iommu_ops *ops = dev_iommu_ops(dev);
> > > > > > > + const struct iommu_ops *ops;
> > > > > > > +
> > > > > > > + if (!dev->iommu || !dev->iommu->iommu_dev) {
> > > > > > > + dev_warn(dev, "%s called without checking succes of iommu_dev_enable_feature?\n",
> > > > > > > + __func__);
> > > > > > > + return ERR_PTR(-ENODEV);
> > > > > > > + }
> > > > > > If that's the case, dev_iommu_ops() will warn a NULL pointer reference.
> > > > > > This kind of error will be discovered at the first place.
> > > > > >
> > > > > > Best regards,
> > > > > > baolu
> > > > > >
> > > > > It will warn this by crashing the system (example from back when idxd had the problem):
> > > > >
> > > > > [ 21.423729] BUG: kernel NULL pointer dereference, address: 0000000000000038
> > > > > [ 21.445108] #PF: supervisor read access in kernel mode
> > > > > [ 21.450912] #PF: error_code(0x0000) - not-present page
> > > > > [ 21.456706] PGD 0
> > > > > [ 21.459047] Oops: 0000 [#1] PREEMPT SMP NOPTI
> > > > > [ 21.464004] CPU: 0 PID: 1420 Comm: kworker/0:3 Not tainted 5.19.0-0.rc3.27.eln120.x86_64 #1
> > > > > [ 21.464011] Hardware name: Intel Corporation EAGLESTREAM/EAGLESTREAM, BIOS EGSDCRB1.SYS.0067.D12.2110190954 10/19/2021
> > > > > [ 21.464015] Workqueue: events work_for_cpu_fn
> > > > > [ 21.464030] RIP: 0010:iommu_sva_bind_device+0x1d/0xe0
> > > > > [ 21.464046] Code: c3 cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 41 54 55 53 48 83 ec 08 48 8b 87 d8 02 00 00 <48> 8b 40 38 48 8b 50 10 48 83 7a 70 00 48 89 14 24 0f 84 91 00 00
> > > > > [ 21.464050] RSP: 0018:ff7245d9096b7db8 EFLAGS: 00010296
> > > > > [ 21.464054] RAX: 0000000000000000 RBX: ff1eadeec8a51000 RCX: 0000000000000000
> > > > > [ 21.464058] RDX: ff7245d9096b7e24 RSI: 0000000000000000 RDI: ff1eadeec8a510d0
> > > > > [ 21.464060] RBP: ff1eadeec8a51000 R08: ffffffffb1a12300 R09: ff1eadffbfce25b4
> > > > > [ 21.464062] R10: ffffffffffffffff R11: 0000000000000038 R12: ffffffffc09f8000
> > > > > [ 21.464065] R13: ff1eadeec8a510d0 R14: ff7245d9096b7e24 R15: ff1eaddf54429000
> > > > > [ 21.464067] FS: 0000000000000000(0000) GS:ff1eadee7f600000(0000) knlGS:0000000000000000
> > > > > [ 21.464070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > > [ 21.464072] CR2: 0000000000000038 CR3: 00000008c0e10006 CR4: 0000000000771ef0
> > > > > [ 21.464074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > > > [ 21.464076] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
> > > > > [ 21.464078] PKRU: 55555554
> > > > > [ 21.464079] Call Trace:
> > > > > [ 21.464083] <TASK>
> > > > > [ 21.464092] idxd_pci_probe+0x259/0x1070 [idxd]
> > > > > [ 21.464121] local_pci_probe+0x3e/0x80
> > > > > [ 21.464132] work_for_cpu_fn+0x13/0x20
> > > > > [ 21.464136] process_one_work+0x1c4/0x380
> > > > > [ 21.464143] worker_thread+0x1ab/0x380
> > > > > [ 21.464147] ? _raw_spin_lock_irqsave+0x23/0x50
> > > > > [ 21.464158] ? process_one_work+0x380/0x380
> > > > > [ 21.464161] kthread+0xe6/0x110
> > > > > [ 21.464168] ? kthread_complete_and_exit+0x20/0x20
> > > > > [ 21.464172] ret_from_fork+0x1f/0x30
> > > > >
> > > > >
> > > > > It was doing that to SPR systems that didn't boot with
> > > > > intel_iommu=on. They had to either enable the iommu, or blacklist the
> > > > > idxd driver until the idxd driver had a fix. The idea here is to
> > > > > avoid taking the system down, and just have the driver get an error back.
> > > >
> > > > If IOMMU is disabled, the iommu_dev_enable_feat(SVA) will return an
> > > > error, the idxd driver should not call the sva_bind() interfaces
> > > > anymore. If the driver doesn't do like this, why not fixing it in the
> > > > driver itself?
> > > >
> > > > Best regards,
> > > > baolu
> > >
> > > The idxd case was found, and fixed by me back in June. I just was
> > > showing the stack trace to show that it crashes the system, not just
> > > puts out a warning.
> > >
> > > Why would this stop someone fixing the problem in a driver that is
> > > calling sva_bind() interface incorrectly?
> > >
> > > Nothing else in the system cares that some driver forgot to call
> > > iommu_dev_enable_feat(), or forgot to check the return value. Nothing
> > > else would be impacted by it, except that the system is being allowed
> > > to crash. If the idea is to get noticed more quickly, couldn't a
> > > WARN_ON() + returning an error solve that without resorting to
> > > crashing the system?
> >
> > The point is really that this is the kind of obvious bug that should be
> > found during development; it's not the IOMMU API's responsibility if some
> > driver patch gets merged and gets as far as a distro release without ever
> > being fully tested. If someone doesn't use an API properly it can go wrong
> > in any number of ways, so the value of maintaining code to mitigate just one
> > of those ways is questionable. In this case, consider if a driver *is*
> > present but failed iommu_dev_enable_feat() for some other reason, then its
> > ->sva_bind goes and dereferences some internal data that it expects the
> > previous ->dev_enable_feat to have allocated. Boom, it just crashes
> > somewhere else instead.
> >
> > If you really think it's worth the effort to maintain code that only serves
> > to give lazy developers a free pass (and I freely admit to being a lazy
> > developer most of the time) then a robust approach would be some generic
> > tracking in dev->iommu for which features have been successfully enabled.
> > Certainly I'm not convinced this patch as-is is worthwhile.
> >
> > However, if a bad driver isn't handling the return from
> > iommu_dev_enable_feature(), who's to say it's actually handling the return
> > from iommu_sva_bind_device() either, and wouldn't still end up crashing some
> > other way? Ultimately it's a game you can't win.
> >
> > Thanks,
> > Robin.
>
> Okay. Thank you for the explanation.
>
> To better understand where that line is for the future, what is the
> argument for device_iommu_capable(), another exported symbol, doing
> the same check? The lack of a prerequisite caller in the comments? To
> be clear I'm asking this out of desire to better know when it should
> be done, not say hey Robin you did it! :)

I should've added it was device_iommu_capable() that gave me the idea
to try that in iommu_sva_bind_device().

>
> I'm just irked by the number of problems I've had to chase down lately
> that are no fault of the iommu code. The past few months have been
> drivers using the dma api incorrectly for years, and OEMs forgetting
> to put RMRR or IVMD blocks in the DMAR and IVRS tables. Of course
> if there is an iommu call in the stack trace, or it goes away if you
> disable the iommu or set iommu.passthrough=1, then obviously the iommu
> is at fault. :)
>
> Thanks,
> Jerry
>

\
 
 \ /
  Last update: 2022-10-14 18:51    [W:0.053 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site