lkml.org 
[lkml]   [2022]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 5/8] ARM: dts: stm32: add adc support to stm32mp13
From
On 10/12/22 16:22, Olivier Moysan wrote:
> Add ADC1 and ADC2 support to STM32MP13 SoC family.
>
> The STM32MP131 provides only ADC2, while other STM32MP13 SoCs provide
> both ADC1 and ADC2.
>
> Internal channels support limitations:
> - VREFINT internal channel requires calibration data from OTP memory.
> The nvmem properties used to access OTP are not defined for time being,
> as OTP support is not yet enabled.
>
> - VBAT internal channel is not defined by default in SoC DT, and
> has be defined in board DT when needed, instead. This avoids unwanted
> current consumption on battery, when ADC conversions are performed
> on any other channels.
>
> Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
> ---
> arch/arm/boot/dts/stm32mp131.dtsi | 43 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp133.dtsi | 31 ++++++++++++++++++++++
> 2 files changed, 74 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
> index dd35a607073d..0b85e7744db5 100644
> --- a/arch/arm/boot/dts/stm32mp131.dtsi
> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
> @@ -313,6 +313,49 @@ i2c5: i2c@4c006000 {
> status = "disabled";
> };
>
> + adc_2: adc@48004000 {

Hi Olivier,

Nodes should be sorted by address here. Maybe Alexandre will take care
when applying ?

With that fixed, you can add my:

Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

Thanks,
Fabrice

> + compatible = "st,stm32mp13-adc-core";
> + reg = <0x48004000 0x400>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc ADC2>, <&rcc ADC2_K>;
> + clock-names = "bus", "adc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> +
> + adc2: adc@0 {
> + compatible = "st,stm32mp13-adc";
> + #io-channel-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> + interrupt-parent = <&adc_2>;
> + interrupts = <0>;
> + dmas = <&dmamux1 10 0x400 0x80000001>;
> + dma-names = "rx";
> + status = "disabled";
> +
> + channel@13 {
> + reg = <13>;
> + label = "vrefint";
> + };
> + channel@14 {
> + reg = <14>;
> + label = "vddcore";
> + };
> + channel@16 {
> + reg = <16>;
> + label = "vddcpu";
> + };
> + channel@17 {
> + reg = <17>;
> + label = "vddq_ddr";
> + };
> + };
> + };
> +
> rcc: rcc@50000000 {
> compatible = "st,stm32mp13-rcc", "syscon";
> reg = <0x50000000 0x1000>;
> diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
> index 531c263c9f46..df451c3c2a26 100644
> --- a/arch/arm/boot/dts/stm32mp133.dtsi
> +++ b/arch/arm/boot/dts/stm32mp133.dtsi
> @@ -33,5 +33,36 @@ m_can2: can@4400f000 {
> bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
> status = "disabled";
> };
> +
> + adc_1: adc@48003000 {
> + compatible = "st,stm32mp13-adc-core";
> + reg = <0x48003000 0x400>;
> + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc ADC1>, <&rcc ADC1_K>;
> + clock-names = "bus", "adc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> +
> + adc1: adc@0 {
> + compatible = "st,stm32mp13-adc";
> + #io-channel-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> + interrupt-parent = <&adc_1>;
> + interrupts = <0>;
> + dmas = <&dmamux1 9 0x400 0x80000001>;
> + dma-names = "rx";
> + status = "disabled";
> +
> + channel@18 {
> + reg = <18>;
> + label = "vrefint";
> + };
> + };
> + };
> };
> };

\
 
 \ /
  Last update: 2022-10-14 14:53    [W:0.133 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site