lkml.org 
[lkml]   [2022]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] iio: temperature: ltc2983: allocate iio channels once
Date
From: Cosmin Tanislav <cosmin.tanislav@analog.com>

Currently, every time the device wakes up from sleep, the
iio_chan array is reallocated, leaking the previous one
until the device is removed (basically never).

Move the allocation to the probe function to avoid this.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
---
drivers/iio/temperature/ltc2983.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
index b652d2b39bcf..a60ccf183687 100644
--- a/drivers/iio/temperature/ltc2983.c
+++ b/drivers/iio/temperature/ltc2983.c
@@ -1385,13 +1385,6 @@ static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio)
return ret;
}

- st->iio_chan = devm_kzalloc(&st->spi->dev,
- st->iio_channels * sizeof(*st->iio_chan),
- GFP_KERNEL);
-
- if (!st->iio_chan)
- return -ENOMEM;
-
ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
LTC2983_NOTCH_FREQ_MASK,
LTC2983_NOTCH_FREQ(st->filter_notch_freq));
@@ -1514,6 +1507,12 @@ static int ltc2983_probe(struct spi_device *spi)
gpiod_set_value_cansleep(gpio, 0);
}

+ st->iio_chan = devm_kzalloc(&spi->dev,
+ st->iio_channels * sizeof(*st->iio_chan),
+ GFP_KERNEL);
+ if (!st->iio_chan)
+ return -ENOMEM;
+
ret = ltc2983_setup(st, true);
if (ret)
return ret;
--
2.37.3
\
 
 \ /
  Last update: 2022-10-14 14:38    [W:0.150 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site