lkml.org 
[lkml]   [2022]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH V5 00/26] Add support UHS-II for GL9755
    Date
    Summary
    =======
    These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.

    About UHS-II, roughly deal with the following three parts:
    1) A UHS-II detection and initialization:
    - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
    [2]).
    - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
    - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
    3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
    Setup Sequence.

    2) Send Legacy SD command through SD-TRAN
    - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
    compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
    Types and Format Overview[3]).
    - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
    CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).

    3) UHS-II Interrupt
    - Except for UHS-II error interrupts, most interrupts share the original
    interrupt registers.

    Patch structure
    ===============
    patch#1-#6: for core
    patch#7-#25: for sdhci
    patch#26: for GL9755

    Changes in v5 (Oct. 14, 2022)
    * rebased to linux-v6.0.
    * according to the guidance and overall architecture provided
    by Ulf Hansson, Ben Chuang and Jason Lai to implement the
    UHS-2 Core function based on the patches of the [V4,0/6]
    Preparations to support SD UHS-II cards[5].
    * according to the guidance and comments provided by
    Adrian Hunter, Ben Chuang and AKASHI Takahiro to implement
    the UHS-2 Host function based on the patches of the
    [RFC,v3.1,00/27] Add support UHS-II for GL9755[4].
    * implement the necessary function to let the UHS-2 Core/Host
    work properly.
    * fix most of checkpatch warnings/errors

    Reference
    =========
    [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
    [2] SD Host Controller Simplified Specification 4.20
    [3] UHS-II Simplified Addendum 1.02
    [4] https://patchwork.kernel.org/project/linux-mmc/cover/20201106022726.19831-1-takahiro.akashi@linaro.org/
    [5] https://patchwork.kernel.org/project/linux-mmc/cover/20220418115833.10738-1-jasonlai.genesyslogic@gmail.com/

    ----------------- original cover letter from v3.1 -----------------
    This is an interim snapshot of our next version, v4, for enabling
    UHS-II on MMC/SD.

    It is focused on 'sdhci' side to address Adrian's comments regarding
    "modularising" sdhci-uhs2.c.
    The whole aim of this version is to get early feedback from Adrian (and
    others) on this issue. Without any consensus about the code structure,
    it would make little sense to go further ahead on sdhci side.
    (Actually, Adrian has made no comments other than "modularising" so far.)

    I heavily reworked/refactored sdhci-uhs2.c and re-organised the patch
    set to meet what I believe Adrian expects; no UHS-II related code in
    Legacy (UHS-I) code or sdhci.c.

    Nevertheless, almost of all changes I made are trivial and straightforward
    in this direction, and I believe that there is no logic changed since v3
    except sdhci_uhs2_irq(), as ops->irq hook, where we must deal with UHS-II
    command sequences in addition to UHS-II errors. So I added extra handlings.

    I admit that there is plenty of room for improvements (for example,
    handling host->flags), but again the focal point here is how sdhci-uhs2.c
    should be built as a module.

    Please review this series (particularly Patch#8-#26 and #27) from this
    viewpoint in the first place.
    (Ben is working on 'host' side but there is no change on 'host' side
    in this submission except a minor tweak.)

    Thanks,
    -Takahiro Akashi

    ------ original cover letter from v3 ------
    Summary
    =======
    These patches[1] support UHS-II and fix GL9755 UHS-II compatibility.

    About UHS-II, roughly deal with the following three parts:
    1) A UHS-II detection and initialization:
    - Host setup to support UHS-II (Section 3.13.1 Host Controller Setup Sequence
    [2]).
    - Detect a UHS-II I/F (Section 3.13.2 Card Interface Detection Sequence[2]).
    - In step(9) of Section 3.13.2 in [2], UHS-II initialization is include Section
    3.13.3 UHS-II Card Initialization and Section 3.13.4 UHS-II Setting Register
    Setup Sequence.

    2) Send Legacy SD command through SD-TRAN
    - Encapsulated SD packets are defined in SD-TRAN in order to ensure Legacy SD
    compatibility and preserve Legacy SD infrastructures (Section 7.1.1 Packet
    Types and Format Overview[3]).
    - Host issue a UHS-II CCMD packet or a UHS-II DCMD (Section 3.13.5 UHS-II
    CCMD Packet issuing and Section 3.13.6 UHS-II DCMD Packet issuing[2]).

    3) UHS-II Interrupt
    - Except for UHS-II error interrupts, most interrupts share the original
    interrupt registers.

    Patch structure
    ===============
    patch#1-#7: for core
    patch#8-#17: for sdhci
    patch#18-#21: for GL9755

    Tests
    =====
    Ran 'dd' command to evaluate the performance:
    (SanDisk UHS-II card on GL9755 controller)
    Read Write
    UHS-II disabled (UHS-I): 88.3MB/s 60.7MB/s
    UHS-II enabled : 206MB/s 80MB/s

    TODO
    ====
    - replace some define with BIT macro

    Reference
    =========
    [1] https://gitlab.com/ben.chuang/linux-uhs2-gl9755.git
    [2] SD Host Controller Simplified Specification 4.20
    [3] UHS-II Simplified Addendum 1.02

    Changes in v3 (Jul. 10, 2020)
    * rebased to v5.8-rc4
    * add copyright notice
    * reorganize the patch set and split some commits into smaller ones
    * separate uhs-2 headers from others
    * correct wrong spellings
    * fix most of checkpatch warnings/errors
    * remove all k[cz]alloc() from the code
    * guard sdhci-uhs2 specific code with
    'if (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2))'
    * make sdhci-uhs2.c as a module
    * trivial changes, including
    - rename back sdhci-core.c to sdhci.c
    - allow vendor code to disable uhs2 if v4_mode == 0
    in __sdhci_add_host()
    - merge uhs2_power_up() into mmc_power_up()
    - remove flag_uhs2 from mmc_attach_sd()
    - add function descriptions to EXPORT'ed functions
    - other minor code optimization

    Changes in v2 (Jan. 9, 2020)
    * rebased to v5.5-rc5

    AKASHI Takahiro (6):
    mmc: sdhci: add a kernel configuration for enabling UHS-II support
    mmc: sdhci: add UHS-II module
    mmc: sdhci-uhs2: dump UHS-II registers
    mmc: sdhci-uhs2: add set_timeout()
    mmc: core: add post-mmc_attach_sd hook
    mmc: sdhci-pci: add UHS-II support framework

    Ben Chuang (1):
    mmc: sdhci-uhs2: add post-mmc_attach_sd hook

    Ulf Hansson (4):
    mmc: core: Cleanup printing of speed mode at card insertion
    mmc: core: Prepare to support SD UHS-II cards
    mmc: core: Announce successful insertion of an SD UHS-II card
    mmc: core: Extend support for mmc regulators with a vqmmc2

    Victor Shih (15):
    mmc: core: Add definitions for SD UHS-II cards
    mmc: core: Support UHS-II card control and access
    mmc: sdhci: add UHS-II related definitions in headers
    mmc: sdhci-uhs2: add reset function and uhs2_mode function
    mmc: sdhci-uhs2: add set_power() to support vdd2
    mmc: sdhci-uhs2: skip signal_voltage_switch()
    mmc: sdhci-uhs2: add set_ios()
    mmc: sdhci-uhs2: add detect_init() to detect the interface
    mmc: sdhci-uhs2: add clock operations
    mmc: sdhci-uhs2: add uhs2_control() to initialise the interface
    mmc: sdhci-uhs2: add request() and others
    mmc: sdhci-uhs2: add irq() and others
    mmc: sdhci-uhs2: add add_host() and others to set up the driver
    mmc: sdhci-uhs2: add pre-detect_init hook
    mmc: sdhci-pci-gli: enable UHS-II mode for GL9755

    drivers/mmc/Kconfig | 22 -
    drivers/mmc/Makefile | 7 -
    drivers/mmc/core/Makefile | 2 +-
    drivers/mmc/core/block.c | 6 +-
    drivers/mmc/core/bus.c | 38 +-
    drivers/mmc/core/core.c | 49 +-
    drivers/mmc/core/core.h | 1 +
    drivers/mmc/core/host.h | 4 +
    drivers/mmc/core/mmc_ops.c | 25 +-
    drivers/mmc/core/mmc_ops.h | 1 +
    drivers/mmc/core/regulator.c | 34 +
    drivers/mmc/core/sd.c | 17 +-
    drivers/mmc/core/sd.h | 3 +
    drivers/mmc/core/sd_ops.c | 18 +
    drivers/mmc/core/sd_ops.h | 3 +
    drivers/mmc/core/sd_uhs2.c | 1394 ++++++++++++++++++++++++
    drivers/mmc/host/Kconfig | 10 +
    drivers/mmc/host/Makefile | 1 +
    drivers/mmc/host/sdhci-pci-core.c | 17 +-
    drivers/mmc/host/sdhci-pci-gli.c | 319 +++++-
    drivers/mmc/host/sdhci-pci.h | 3 +
    drivers/mmc/host/sdhci-uhs2.c | 1634 +++++++++++++++++++++++++++++
    drivers/mmc/host/sdhci-uhs2.h | 226 ++++
    drivers/mmc/host/sdhci.c | 335 +++---
    drivers/mmc/host/sdhci.h | 125 ++-
    include/linux/mmc/card.h | 47 +
    include/linux/mmc/core.h | 13 +
    include/linux/mmc/host.h | 99 ++
    include/linux/mmc/sd_uhs2.h | 263 +++++
    29 files changed, 4516 insertions(+), 200 deletions(-)
    delete mode 100644 drivers/mmc/Kconfig
    delete mode 100644 drivers/mmc/Makefile
    create mode 100644 drivers/mmc/core/sd_uhs2.c
    create mode 100644 drivers/mmc/host/sdhci-uhs2.c
    create mode 100644 drivers/mmc/host/sdhci-uhs2.h
    create mode 100644 include/linux/mmc/sd_uhs2.h

    --
    2.25.1

    \
     
     \ /
      Last update: 2022-10-14 13:47    [W:4.237 / U:0.820 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site