lkml.org 
[lkml]   [2022]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] vdpa: show dev config as-is in "vdpa dev show" output
Date
Live migration of vdpa would typically require re-instate vdpa
device with an idential set of configs on the destination node,
same way as how source node created the device in the first
place. In order to save orchestration software from memorizing
and keeping track of vdpa config, it will be helpful if the vdpa
tool provides the aids for exporting the initial configs from
which vdpa device was created as-is. The "vdpa dev show" command
seems to be the right vehicle for that. It is unlike the "vdpa dev
config show" command output that usually goes with the live value
in the device config space, which is not quite reliable subject to
the dynamics of feature negotiation and possible change in device
config space.

Examples:

1) Create vDPA by default without any config attribute

$ vdpa dev add mgmtdev pci/0000:41:04.2 name vdpa0
$ vdpa dev show vdpa0
vdpa0: type network mgmtdev pci/0000:41:04.2 vendor_id 5555 max_vqs 9 max_vq_size 256
$ vdpa dev -jp show vdpa0
{
"dev": {
"vdpa0": {
"type": "network",
"mgmtdev": "pci/0000:41:04.2",
"vendor_id": 5555,
"max_vqs": 9,
"max_vq_size": 256,
}
}
}

2) Create vDPA with config attribute(s) specified

$ vdpa dev add mgmtdev pci/0000:41:04.2 name vdpa0 \
mac e4:11:c6:d3:45:f0 max_vq_pairs 4
$ vdpa dev show
vdpa0: type network mgmtdev pci/0000:41:04.2 vendor_id 5555 max_vqs 9 max_vq_size 256
mac e4:11:c6:d3:45:f0 max_vq_pairs 4
$ vdpa dev -jp show
{
"dev": {
"vdpa0": {
"type": "network",
"mgmtdev": "pci/0000:41:04.2",
"vendor_id": 5555,
"max_vqs": 9,
"max_vq_size": 256,
"mac": "e4:11:c6:d3:45:f0",
"max_vq_pairs": 4
}
}
}

Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
---
drivers/vdpa/vdpa.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 566c1c6..91eca6d 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -677,6 +677,41 @@ static int vdpa_nl_cmd_dev_del_set_doit(struct sk_buff *skb, struct genl_info *i
}

static int
+vdpa_dev_cfgattrs_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 device_id)
+{
+ struct vdpa_dev_set_config *cfg = &vdev->vdev_cfg;
+ int err = -EMSGSIZE;
+
+ if (!cfg->mask)
+ return 0;
+
+ switch (device_id) {
+ case VIRTIO_ID_NET:
+ if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR)) != 0 &&
+ nla_put(msg, VDPA_ATTR_DEV_NET_CFG_MACADDR,
+ sizeof(cfg->net.mac), cfg->net.mac))
+ return err;
+ if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU)) != 0 &&
+ nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MTU, cfg->net.mtu))
+ return err;
+ if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP)) != 0 &&
+ nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MAX_VQP,
+ cfg->net.max_vq_pairs))
+ return err;
+ break;
+ default:
+ break;
+ }
+
+ if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) != 0 &&
+ nla_put_u64_64bit(msg, VDPA_ATTR_DEV_FEATURES,
+ cfg->device_features, VDPA_ATTR_PAD))
+ return err;
+
+ return 0;
+}
+
+static int
vdpa_dev_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 portid, u32 seq,
int flags, struct netlink_ext_ack *extack)
{
@@ -715,6 +750,10 @@ static int vdpa_nl_cmd_dev_del_set_doit(struct sk_buff *skb, struct genl_info *i
if (nla_put_u16(msg, VDPA_ATTR_DEV_MIN_VQ_SIZE, min_vq_size))
goto msg_err;

+ err = vdpa_dev_cfgattrs_fill(vdev, msg, device_id);
+ if (err)
+ goto msg_err;
+
genlmsg_end(msg, hdr);
return 0;

--
1.8.3.1
\
 
 \ /
  Last update: 2022-10-15 03:34    [W:0.122 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site