lkml.org 
[lkml]   [2022]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] iommu/sun50i: Fix reset release
Date
Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.

Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.

This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
drivers/iommu/sun50i-iommu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
index a84c63518773..c777882d0ec2 100644
--- a/drivers/iommu/sun50i-iommu.c
+++ b/drivers/iommu/sun50i-iommu.c
@@ -27,6 +27,7 @@
#include <linux/types.h>

#define IOMMU_RESET_REG 0x010
+#define IOMMU_RESET_RELEASE_ALL 0xffffffff
#define IOMMU_ENABLE_REG 0x020
#define IOMMU_ENABLE_ENABLE BIT(0)

@@ -893,7 +894,7 @@ static irqreturn_t sun50i_iommu_irq(int irq, void *dev_id)
iommu_write(iommu, IOMMU_INT_CLR_REG, status);

iommu_write(iommu, IOMMU_RESET_REG, ~status);
- iommu_write(iommu, IOMMU_RESET_REG, status);
+ iommu_write(iommu, IOMMU_RESET_REG, IOMMU_RESET_RELEASE_ALL);

spin_unlock(&iommu->iommu_lock);

--
2.38.0
\
 
 \ /
  Last update: 2022-10-13 20:21    [W:0.127 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site