lkml.org 
[lkml]   [2022]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V5 2/3] PCI: qcom-ep: Refactor EP initialization completion
Date
Move the post initialization code to .ep_init_late() call back and call
only dw_pcie_ep_init_notify() which internally takes care of calling
dw_pcie_ep_init_complete().

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
V5:
* None

V4:
* New patch in this series

drivers/pci/controller/dwc/pcie-qcom-ep.c | 27 ++++++++++++++---------
1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index e33eb3871309..c418b20042aa 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -361,22 +361,12 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
PARF_INT_ALL_LINK_UP;
writel_relaxed(val, pcie_ep->parf + PARF_INT_ALL_MASK);

- ret = dw_pcie_ep_init_complete(&pcie_ep->pci.ep);
+ ret = dw_pcie_ep_init_notify(&pcie_ep->pci.ep);
if (ret) {
dev_err(dev, "Failed to complete initialization: %d\n", ret);
goto err_disable_resources;
}

- /*
- * The physical address of the MMIO region which is exposed as the BAR
- * should be written to MHI BASE registers.
- */
- writel_relaxed(pcie_ep->mmio_res->start,
- pcie_ep->parf + PARF_MHI_BASE_ADDR_LOWER);
- writel_relaxed(0, pcie_ep->parf + PARF_MHI_BASE_ADDR_UPPER);
-
- dw_pcie_ep_init_notify(&pcie_ep->pci.ep);
-
/* Enable LTSSM */
val = readl_relaxed(pcie_ep->parf + PARF_LTSSM);
val |= BIT(8);
@@ -643,8 +633,23 @@ static void qcom_pcie_ep_init(struct dw_pcie_ep *ep)
dw_pcie_ep_reset_bar(pci, bar);
}

+static void qcom_pcie_ep_init_late(struct dw_pcie_ep *ep)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+
+ /*
+ * The physical address of the MMIO region which is exposed as the BAR
+ * should be written to MHI BASE registers.
+ */
+ writel_relaxed(pcie_ep->mmio_res->start,
+ pcie_ep->parf + PARF_MHI_BASE_ADDR_LOWER);
+ writel_relaxed(0, pcie_ep->parf + PARF_MHI_BASE_ADDR_UPPER);
+}
+
static const struct dw_pcie_ep_ops pci_ep_ops = {
.ep_init = qcom_pcie_ep_init,
+ .ep_init_late = qcom_pcie_ep_init_late,
.raise_irq = qcom_pcie_ep_raise_irq,
.get_features = qcom_pcie_epc_get_features,
};
--
2.17.1
\
 
 \ /
  Last update: 2022-10-13 20:16    [W:0.255 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site