lkml.org 
[lkml]   [2022]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/3] arm64: dts: marvell: Update network description to match schema
Date
From: Marcin Wojtas <mw@semihalf.com>

Update the PP2 ethernet ports subnodes' names to match
schema enforced by the marvell,pp2.yaml contents.

Add new required properties ('reg') which contains information
about the port ID, keeping 'port-id' ones for backward
compatibility.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index d6c0990a267d..7d0043824f2a 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -58,6 +58,8 @@ config-space@CP11X_BASE {
ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;

CP11X_LABEL(ethernet): ethernet@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
@@ -69,7 +71,7 @@ CP11X_LABEL(ethernet): ethernet@0 {
status = "disabled";
dma-coherent;

- CP11X_LABEL(eth0): eth0 {
+ CP11X_LABEL(eth0): ethernet-port@0 {
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
<43 IRQ_TYPE_LEVEL_HIGH>,
<47 IRQ_TYPE_LEVEL_HIGH>,
@@ -83,12 +85,13 @@ CP11X_LABEL(eth0): eth0 {
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
- port-id = <0>;
+ reg = <0>;
+ port-id = <0>; /* For backward compatibility. */
gop-port-id = <0>;
status = "disabled";
};

- CP11X_LABEL(eth1): eth1 {
+ CP11X_LABEL(eth1): ethernet-port@1 {
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
<44 IRQ_TYPE_LEVEL_HIGH>,
<48 IRQ_TYPE_LEVEL_HIGH>,
@@ -102,12 +105,13 @@ CP11X_LABEL(eth1): eth1 {
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
- port-id = <1>;
+ reg = <1>;
+ port-id = <1>; /* For backward compatibility. */
gop-port-id = <2>;
status = "disabled";
};

- CP11X_LABEL(eth2): eth2 {
+ CP11X_LABEL(eth2): ethernet-port@2 {
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
<45 IRQ_TYPE_LEVEL_HIGH>,
<49 IRQ_TYPE_LEVEL_HIGH>,
@@ -121,7 +125,8 @@ CP11X_LABEL(eth2): eth2 {
interrupt-names = "hif0", "hif1", "hif2",
"hif3", "hif4", "hif5", "hif6", "hif7",
"hif8", "link";
- port-id = <2>;
+ reg = <2>;
+ port-id = <2>; /* For backward compatibility. */
gop-port-id = <3>;
status = "disabled";
};
--
2.37.3
\
 
 \ /
  Last update: 2022-10-13 18:53    [W:0.255 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site