lkml.org 
[lkml]   [2022]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] rtc: rtc-cmos: Fix event handler registration ordering issue
On Wed, Oct 12, 2022 at 11:00 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Wed, Oct 12, 2022 at 08:07:01PM +0200, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > Because acpi_install_fixed_event_handler() enables the event
> > automatically on success, it is incorrect to call it before the
> > handler routine passed to it is ready to handle events.
> >
> > Unfortunately, the rtc-cmos driver does exactly the incorrect thing
> > by calling cmos_wake_setup(), which passes rtc_handler() to
> > acpi_install_fixed_event_handler(), before cmos_do_probe(), because
> > rtc_handler() uses dev_get_drvdata() to get to the cmos object
> > pointer and the driver data pointer is only populated in
> > cmos_do_probe().
> >
> > This leads to a NULL pointer dereference in rtc_handler() on boot
> > if the RTC fixed event happens to be active at the init time.
> >
> > To address this issue, change the initialization ordering of the
> > driver so that cmos_wake_setup() is always called after a successful
> > cmos_do_probe() call.
> >
> > While at it, change cmos_pnp_probe() to call cmos_do_probe() after
> > the initial if () statement used for computing the IRQ argument to
> > be passed to cmos_do_probe() which is cleaner than calling it in
> > each branch of that if () (local variable "irq" can be of type int,
> > because it is passed to that function as an argument of type int).
> >
> > Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check
> > ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
> > of systems, because previously it only affected systems with
> > ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
> > commit.
> >
> > Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0")
> > Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver")
> > Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/
> > Reported-by: Mel Gorman <mgorman@techsingularity.net>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
>
> Yep, I blew it with a474aaedac99, sorry about that.
>
> Possibly could call cmos_wake_setup() from cmos_do_probe() instead of
> from cmos_pnp_probe() and cmos_platform_probe()?

Sounds good.

I would prefer to send a separate patch for this on top of the
$subject one, unless Alexandre wants me to do it all in one go.

Alexandre, what's your preference here? Or would you prefer if I
pushed this forward?

> Then there would be a single call site and it would be closer to the actual dependency on
> dev_set_drvdata(). Either way is fine with me.

OK

> Unrelated, but I happened to notice that pnp_irq() returns -1 for
> failure, and this note suggests that possibly returning 0 would be
> better:
>
> https://lore.kernel.org/r/CAHk-=wg2Pkb9kbfbstbB91AJA2SF6cySbsgHG-iQMq56j3VTcA@mail.gmail.com

Probably.

In that case, though, it would be prudent to also explicitly discard
IRQ resources where start is equal to 0.

>
> > ---
> > drivers/rtc/rtc-cmos.c | 29 +++++++++++++++++++----------
> > 1 file changed, 19 insertions(+), 10 deletions(-)
> >
> > Index: linux-pm/drivers/rtc/rtc-cmos.c
> > ===================================================================
> > --- linux-pm.orig/drivers/rtc/rtc-cmos.c
> > +++ linux-pm/drivers/rtc/rtc-cmos.c
> > @@ -1352,10 +1352,10 @@ static void cmos_check_acpi_rtc_status(s
> >
> > static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
> > {
> > - cmos_wake_setup(&pnp->dev);
> > + int irq, ret;
> >
> > if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
> > - unsigned int irq = 0;
> > + irq = 0;
> > #ifdef CONFIG_X86
> > /* Some machines contain a PNP entry for the RTC, but
> > * don't define the IRQ. It should always be safe to
> > @@ -1364,13 +1364,17 @@ static int cmos_pnp_probe(struct pnp_dev
> > if (nr_legacy_irqs())
> > irq = RTC_IRQ;
> > #endif
> > - return cmos_do_probe(&pnp->dev,
> > - pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
> > } else {
> > - return cmos_do_probe(&pnp->dev,
> > - pnp_get_resource(pnp, IORESOURCE_IO, 0),
> > - pnp_irq(pnp, 0));
> > + irq = pnp_irq(pnp, 0);
> > }
> > +
> > + ret = cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
> > + if (ret)
> > + return ret;
> > +
> > + cmos_wake_setup(&pnp->dev);
> > +
> > + return 0;
> > }
> >
> > static void cmos_pnp_remove(struct pnp_dev *pnp)
> > @@ -1454,10 +1458,9 @@ static inline void cmos_of_init(struct p
> > static int __init cmos_platform_probe(struct platform_device *pdev)
> > {
> > struct resource *resource;
> > - int irq;
> > + int irq, ret;
> >
> > cmos_of_init(pdev);
> > - cmos_wake_setup(&pdev->dev);
> >
> > if (RTC_IOMAPPED)
> > resource = platform_get_resource(pdev, IORESOURCE_IO, 0);
> > @@ -1467,7 +1470,13 @@ static int __init cmos_platform_probe(st
> > if (irq < 0)
> > irq = -1;
> >
> > - return cmos_do_probe(&pdev->dev, resource, irq);
> > + ret = cmos_do_probe(&pdev->dev, resource, irq);
> > + if (ret)
> > + return ret;
> > +
> > + cmos_wake_setup(&pdev->dev);
> > +
> > + return 0;
> > }
> >
> > static int cmos_platform_remove(struct platform_device *pdev)
> >
> >
> >

\
 
 \ /
  Last update: 2022-10-13 13:39    [W:0.055 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site