Messages in this thread | | | From | Rob Herring <> | Subject | Re: [PATCH 1/3] dt-bindings: PCI: cdns: Add PHY latency properties | Date | Thu, 13 Oct 2022 06:22:44 -0500 |
| |
On Thu, 13 Oct 2022 08:26:47 +0200, Dominic Rath wrote: > From: Alexander Bahle <bahle@ibv-augsburg.de> > > Add "cdns,tx-phy-latency-ps" and "cdns,rx-phy-latency-ps" DT bindings for > setting the PCIe PHY latencies. > The properties expect a list of uint32 PHY latencies in picoseconds for > every supported speed starting at PCIe Gen1, e.g.: > > max-link-speed = <2>; > tx-phy-latency-ps = <100000 200000>; /* Gen1: 100ns, Gen2: 200ns */ > rx-phy-latency-ps = <150000 250000>; /* Gen1: 150ns, Gen2: 250ns */ > > There should be a value for every supported speed. > > Signed-off-by: Alexander Bahle <bahle@ibv-augsburg.de> > Signed-off-by: Dominic Rath <rath@ibv-augsburg.de> > --- > .../bindings/pci/cdns,cdns-pcie-ep.yaml | 2 ++ > .../bindings/pci/cdns,cdns-pcie-host.yaml | 2 ++ > .../devicetree/bindings/pci/cdns-pcie-ep.yaml | 20 +++++++++++++++++++ > .../bindings/pci/cdns-pcie-host.yaml | 20 +++++++++++++++++++ > 4 files changed, 44 insertions(+) >
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml: properties:cdns,tx-phy-latency-ps: '$ref' should not be valid under {'const': '$ref'} hint: Standard unit suffix properties don't need a type $ref from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml: properties:cdns,rx-phy-latency-ps: '$ref' should not be valid under {'const': '$ref'} hint: Standard unit suffix properties don't need a type $ref from schema $id: http://devicetree.org/meta-schemas/core.yaml# ./Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml ./Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml: properties:cdns,tx-phy-latency-ps: '$ref' should not be valid under {'const': '$ref'} hint: Standard unit suffix properties don't need a type $ref from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml: properties:cdns,rx-phy-latency-ps: '$ref' should not be valid under {'const': '$ref'} hint: Standard unit suffix properties don't need a type $ref from schema $id: http://devicetree.org/meta-schemas/core.yaml# ./Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml ./Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
| |