lkml.org 
[lkml]   [2022]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 07/10] drm/msm/dsi: Disallow 8 BPC DSC configuration for alternative BPC values
On 2022-10-12 16:08:07, Abhinav Kumar wrote:
>
>
> On 10/9/2022 11:51 AM, Marijn Suijten wrote:
> > According to the `/* bpc 8 */` comment below only values for a
> > bits_per_component of 8 are currently hardcoded in place. This is
> > further confirmed by downstream sources [1] containing different
> > constants for other BPC values (and different initial_offset too,
> > with an extra dependency on bits_per_pixel). Prevent future mishaps by
> > explicitly disallowing any other bits_per_component value until the
> > right parameters are put in place and tested.
> >
> > [1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/DISPLAY.LA.2.0.r1-08000-WAIPIO.0/msm/sde_dsc_helper.c#L110-139
> >
>
> Seems like a valid kbot error.
>
> https://patchwork.freedesktop.org/patch/506359/#comment_912830

It is correct, and I suggested in [1] to either reorder this patch 7/10
after 8/10, or pull back the msm_host pointer argument into this patch.

[1]: https://lore.kernel.org/linux-arm-msm/20221011075119.tvn5j5jm6aqnhqv2@SoMainline.org/

- Marijn

> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> > ---
> > drivers/gpu/drm/msm/dsi/dsi_host.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > index 68c39debc22f..7e6b7e506ae8 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > @@ -1774,6 +1774,11 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
> > {
> > int i;
> >
> > + if (dsc->bits_per_component != 8) {
> > + DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support bits_per_component != 8 yet\n");
> > + return -EOPNOTSUPP;
> > + }
> > +
> > dsc->rc_model_size = 8192;
> > dsc->first_line_bpg_offset = 12;
> > dsc->rc_edge_factor = 6;

\
 
 \ /
  Last update: 2022-10-13 11:28    [W:0.146 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site