lkml.org 
[lkml]   [2022]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v1 0/5] Support System Suspend and Resume for CS35L41 HDA
    On Tue, 11 Oct 2022 16:35:47 +0200,
    Stefan Binding wrote:
    >
    > The CS35L41 HDA driver currently only supports runtime suspend and resume.
    > Add support for system suspend and resume into the CS35L41 HDA driver.
    > The driver will put the parts into a state where they can be powered down
    > during suspend, and on system resume, it will restore the part.
    > If firmware was previously loaded, during system suspend, the firmware will
    > be unloaded, and during system resume, it will be loaded again.
    >
    > Note: System suspend is only supported for models which use Internal Boost,
    > or models which use External Boost with a Boost Enable GPIO.
    >
    > The chain also contains minor bug fixes for the CS35L41 HDA driver, and
    > associated hda_cs_dsp_ctl driver.
    >
    > Richard Fitzgerald (1):
    > ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls
    >
    > Stefan Binding (4):
    > ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal
    > ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before
    > reading/writing controls
    > ALSA: hda: cs35l41: Remove suspend/resume hda hooks
    > ALSA: hda: cs35l41: Support System Suspend

    Applied all five patches now.


    thanks,

    Takashi

    \
     
     \ /
      Last update: 2022-10-12 08:12    [W:3.284 / U:0.388 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site