Messages in this thread | | | Date | Tue, 11 Oct 2022 09:54:49 -0700 | Subject | Re: [PATCH v2 2/3] dt-bindings: hwmon: Add binding for max6639 | From | Guenter Roeck <> |
| |
On 10/11/22 09:28, Krzysztof Kozlowski wrote: > On 11/10/2022 06:47, Naresh Solanki wrote: >> From: Marcello Sylvester Bauer <sylv@sylv.io> >> >> Add Devicetree binding documentation for Maxim MAX6639 temperature >> monitor with PWM fan-speed controller. >> >> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> >> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> >> --- >> .../bindings/hwmon/maxim,max6639.yaml | 116 ++++++++++++++++++ >> 1 file changed, 116 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml >> >> diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml >> new file mode 100644 >> index 000000000000..bbefb0a57ab3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml >> @@ -0,0 +1,116 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> + >> +$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Maxim max6639 >> + >> +maintainers: >> + - Roland Stigge <stigge@antcom.de> >> + >> +description: | >> + The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM >> + fan-speed controller. It monitors its own temperature and one external >> + diode-connected transistor or the temperatures of two external diode-connected >> + transistors, typically available in CPUs, FPGAs, or GPUs. >> + >> + Datasheets: >> + https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf >> + >> +properties: >> + compatible: >> + enum: >> + - maxim,max6639 >> + >> + reg: >> + maxItems: 1 >> + >> + '#address-cells': >> + const: 1 >> + >> + '#size-cells': >> + const: 0 >> + >> +required: >> + - compatible >> + - reg >> + >> +patternProperties: >> + "^ot[0-1]_indication$": > > No underscores in names. > >> + type: boolean >> + default: false >> + description: >> + If true then enable OT pin indication. > > Description copies the name of property. Not really useful. Describe > that it does. > > Why this has 0 and 1 numbers? Isn't it connected with fan? >
I had to look up the suggested code to understand what it means. All the _indication properties actually configure the chip to enable or disable various alarm output pins (ALERT, OT, THERM, and FANFAIL). I for my part find the therm "indication" quite confusing.
Guenter
>> + >> + "^therm[0-1]_indication$": >> + type: boolean >> + default: false >> + description: >> + If true then enable THERM pin indication. > > Ditto > >> + >> + "^fan@[0-1]$": > > [01] > The same in other cases. > >> + type: object >> + description: | >> + Represents the two fans and their specific configuration. >> + >> + $ref: fan-common.yaml# >> + >> + properties: >> + reg: >> + description: | >> + The fan number. >> + items: >> + minimum: 0 >> + maximum: 1 >> + >> + maxim,fan-spin-up: >> + type: boolean >> + description: >> + If true then whnever the fan starts up from zero drive, it > > whenever > run spell-check > >> + is driven with 100% duty cycle for 2s to ensure that it >> + starts. >> + >> + maxim,full-speed-on-therm: >> + type: boolean >> + description: >> + If true then force fan to full speed if THERM pin goes low. >> + >> + maxim,fanfail_indication: > > No underscores > >> + type: boolean >> + description: >> + If true then enable fanfail pin indication. > > Missing blank line > >> + required: >> + - reg >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + i2c { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + max6639@10 { > > Node names should be generic. > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > >> + compatible = "maxim,max6639"; >> + reg = <0x10>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + fan@0 { >> + reg = <0x0>; >> + pulses-per-revolution = <2>; >> + max-rpm = <4000>; >> + pwm-frequency = <25000>; >> + }; >> + >> + fan@1 { >> + reg = <0x1>; >> + pulses-per-revolution = <2>; >> + max-rpm = <32000>; >> + pwm-frequency = <25000>; >> + }; >> + }; >> + }; >> +... > > Best regards, > Krzysztof >
| |