Messages in this thread | | | Date | Wed, 12 Oct 2022 01:13:23 +0200 | Subject | Re: [PATCH V4 0/7] imx: blk-ctrl: Add interconnect for i.MX8MP | From | Marek Vasut <> |
| |
On 10/11/22 22:10, Tim Harvey wrote: > On Fri, Jul 8, 2022 at 1:57 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote: >> >> From: Peng Fan <peng.fan@nxp.com> >> >> V4: >> Because the header is not included when adding NoC node, the fsl,imx8mp.h >> needs be included in this patchset. So include it in patch 6 >> >> V3: >> Move adding NoC node patch to i.MX8MP ICC driver patchset >> Per Lucas's comments, warn once when icc bulk get not return probe defer and continue. >> >> V2: >> Use a low bandwidth value instead INT_MAX >> Minor fix to move fsl,imx8mp.h out to dts patch, not driver patch >> Add A-b tag from DT maintainer >> >> i.MX8MP NoC settings is invalid after related power domain up. So >> need to set valid values after power domain up. >> >> This patchset is to bind interconnect for each entry in blk ctrl. >> >> This patchset is not include DVFS DDRC feature. >> >> Peng Fan (7): >> dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk >> ctrl >> dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk >> ctrl >> dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk >> ctrl >> soc: imx: add icc paths for i.MX8MP media blk ctrl >> soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl >> arm64: dts: imx8mp: add interconnects for media blk ctrl >> arm64: dts: imx8mp: add interconnect for hsio blk ctrl >> >> .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml | 9 +++++ >> .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml | 10 +++++ >> .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml | 14 +++++++ >> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +++++++++ >> drivers/soc/imx/imx8m-blk-ctrl.c | 39 +++++++++++++++++++ >> drivers/soc/imx/imx8mp-blk-ctrl.c | 35 +++++++++++++++++ >> 6 files changed, 125 insertions(+) >> >> -- >> 2.25.1 >> > > Hi Peng, > > I built origin/master from commit 041bc24d867a today for an imx8mp > board and am running into errors that appear to be introduced by this > series: > [ 15.177372] platform 381f0040.usb-phy: deferred probe pending > [ 15.183155] platform 382f0040.usb-phy: deferred probe pending > [ 15.188928] platform 33800000.pcie: deferred probe pending > [ 15.194439] platform 32ec0000.blk-ctrl: deferred probe pending > [ 15.200287] platform 38330000.blk-ctrl: deferred probe pending > [ 15.206129] platform 32f10000.blk-ctrl: deferred probe pending > [ 15.211974] platform 32f10100.usb: deferred probe pending > [ 15.217382] platform 32f10108.usb: deferred probe pending > [ 15.222791] platform cpufreq-dt: deferred probe pending > # cat /sys/kernel/debug/devices_deferred > 381f0040.usb-phy platform: supplier 32f10000.blk-ctrl not ready > 382f0040.usb-phy platform: supplier 32f10000.blk-ctrl not ready > 33800000.pcie platform: supplier 32f10000.blk-ctrl not ready > 32ec0000.blk-ctrl imx8m-blk-ctrl: failed to get noc entries > 38330000.blk-ctrl imx8m-blk-ctrl: failed to get noc entries > 32f10000.blk-ctrl imx8mp-blk-ctrl: failed to get noc entries > 32f10100.usb platform: supplier 32f10000.blk-ctrl not ready > 32f10108.usb platform: supplier 32f10000.blk-ctrl not ready > cpufreq-dt > > Is there a driver I'm perhaps missing that is needed now or are there > some patches that come from a different unmerged tree needed?
Do you have these enabled ?
CONFIG_INTERCONNECT_IMX8MM=y CONFIG_INTERCONNECT_IMX8MN=y CONFIG_INTERCONNECT_IMX8MQ=y CONFIG_INTERCONNECT_IMX8MP=y
| |