Messages in this thread | | | Date | Mon, 10 Oct 2022 14:03:59 +0200 | Subject | Re: [PATCH v2 2/6] arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength | From | Neil Armstrong <> |
| |
On 10/10/2022 13:44, Krzysztof Kozlowski wrote: > The pin configuration (done with generic pin controller helpers and > as expressed by bindings) requires children nodes with either: > 1. "pins" property and the actual configuration, > 2. another set of nodes with above point. > > The qup_spi2_default pin configuration uses alreaady the second method > with a "pinmux" child, so configure drive-strength similarly in > "pinconf". Otherwise the PIN drive strength would not be applied. > > Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes") > Cc: <stable@vger.kernel.org> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Not tested on hardware. > > Changes since v1: > 1. Put it under pinconf instead of pinmux, as suggested by Doug. > ---
<snip>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
| |