lkml.org 
[lkml]   [2022]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH AUTOSEL 6.0 12/77] net: mscc: ocelot: adjust forwarding domain for CPU ports in a LAG
Date
On Sun, Oct 09, 2022 at 06:06:49PM -0400, Sasha Levin wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> [ Upstream commit 291ac1517af58670740528466ccebe3caefb9093 ]
>
> Currently when we have 2 CPU ports configured for DSA tag_8021q mode and
> we put them in a LAG, a PGID dump looks like this:
>
> PGID_SRC[0] = ports 4,
> PGID_SRC[1] = ports 4,
> PGID_SRC[2] = ports 4,
> PGID_SRC[3] = ports 4,
> PGID_SRC[4] = ports 0, 1, 2, 3, 4, 5,
> PGID_SRC[5] = no ports
>
> (ports 0-3 are user ports, ports 4 and 5 are CPU ports)
>
> There are 2 problems with the configuration above:
>
> - user ports should enable forwarding towards both CPU ports, not just 4,
> and the aggregation PGIDs should prune one CPU port or the other from
> the destination port mask, based on a hash computed from packet headers.
>
> - CPU ports should not be allowed to forward towards themselves and also
> not towards other ports in the same LAG as themselves
>
> The first problem requires fixing up the PGID_SRC of user ports, when
> ocelot_port_assigned_dsa_8021q_cpu_mask() is called. We need to say that
> when a user port is assigned to a tag_8021q CPU port and that port is in
> a LAG, it should forward towards all ports in that LAG.
>
> The second problem requires fixing up the PGID_SRC of port 4, to remove
> ports 4 and 5 (in a LAG) from the allowed destinations.
>
> After this change, the PGID source masks look as follows:
>
> PGID_SRC[0] = ports 4, 5,
> PGID_SRC[1] = ports 4, 5,
> PGID_SRC[2] = ports 4, 5,
> PGID_SRC[3] = ports 4, 5,
> PGID_SRC[4] = ports 0, 1, 2, 3,
> PGID_SRC[5] = no ports
>
> Note that PGID_SRC[5] still looks weird (it should say "0, 1, 2, 3" just
> like PGID_SRC[4] does), but I've tested forwarding through this CPU port
> and it doesn't seem like anything is affected (it appears that PGID_SRC[4]
> is being looked up on forwarding from the CPU, since both ports 4 and 5
> have logical port ID 4). The reason why it looks weird is because
> we've never called ocelot_port_assign_dsa_8021q_cpu() for any user port
> towards port 5 (all user ports are assigned to port 4 which is in a LAG
> with 5).
>
> Since things aren't broken, I'm willing to leave it like that for now
> and just document the oddity.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---

Not needed for stable kernels, please drop, thanks.
\
 
 \ /
  Last update: 2022-10-10 13:58    [W:0.283 / U:4.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site