Messages in this thread Patch in this message | | | From | mikhail.kshevetskiy@iopsys ... | Subject | [PATCH v3 1/2] mtd: spinand: winbond: fix flash identification | Date | Mon, 10 Oct 2022 13:51:09 +0300 |
| |
From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Winbond uses 3 bytes to identify flash: vendor_id, dev_id_0, dev_id_1, but current driver uses only first 2 bytes of it for devices identification. As result Winbond W25N02KV flash (id_bytes: EF, AA, 22) is identified as W25N01GV (id_bytes: EF, AA, 21).
Fix this by adding missed identification bytes.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> --- drivers/mtd/nand/spi/winbond.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index 76684428354e..ed368a55d68f 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -76,7 +76,7 @@ static int w25m02gv_select_target(struct spinand_device *spinand, static const struct spinand_info winbond_spinand_table[] = { SPINAND_INFO("W25M02GV", - SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab), + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, @@ -86,7 +86,7 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL), SPINAND_SELECT_TARGET(w25m02gv_select_target)), SPINAND_INFO("W25N01GV", - SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa), + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x21), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(1, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, -- 2.35.1
| |