lkml.org 
[lkml]   [2022]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/8] ext4: Remove the logic to trim inode PAs
On Fri 07-10-22 02:16:19, Ojaswin Mujoo wrote:
> Earlier, inode PAs were stored in a linked list. This caused a need to
> periodically trim the list down inorder to avoid growing it to a very
> large size, as this would severly affect performance during list
> iteration.
>
> Recent patches changed this list to an rbtree, and since the tree scales
> up much better, we no longer need to have the trim functionality, hence
> remove it.
>
> Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>

Looks good. Feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

Honza

> ---
> Documentation/admin-guide/ext4.rst | 3 ---
> fs/ext4/ext4.h | 1 -
> fs/ext4/mballoc.c | 20 --------------------
> fs/ext4/mballoc.h | 5 -----
> fs/ext4/sysfs.c | 2 --
> 5 files changed, 31 deletions(-)
>
> diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
> index 4c559e08d11e..5740d85439ff 100644
> --- a/Documentation/admin-guide/ext4.rst
> +++ b/Documentation/admin-guide/ext4.rst
> @@ -489,9 +489,6 @@ Files in /sys/fs/ext4/<devname>:
> multiple of this tuning parameter if the stripe size is not set in the
> ext4 superblock
>
> - mb_max_inode_prealloc
> - The maximum length of per-inode ext4_prealloc_space list.
> -
> mb_max_to_scan
> The maximum number of extents the multiblock allocator will search to
> find the best extent.
> diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
> index c23be3b45442..1d2ed29278e2 100644
> --- a/fs/ext4/ext4.h
> +++ b/fs/ext4/ext4.h
> @@ -1612,7 +1612,6 @@ struct ext4_sb_info {
> unsigned int s_mb_stats;
> unsigned int s_mb_order2_reqs;
> unsigned int s_mb_group_prealloc;
> - unsigned int s_mb_max_inode_prealloc;
> unsigned int s_max_dir_size_kb;
> /* where last allocation was done - for stream allocation */
> unsigned long s_mb_last_group;
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index 33896e47059b..9c446d87a61c 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -3419,7 +3419,6 @@ int ext4_mb_init(struct super_block *sb)
> sbi->s_mb_stats = MB_DEFAULT_STATS;
> sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
> sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
> - sbi->s_mb_max_inode_prealloc = MB_DEFAULT_MAX_INODE_PREALLOC;
> /*
> * The default group preallocation is 512, which for 4k block
> * sizes translates to 2 megabytes. However for bigalloc file
> @@ -5537,29 +5536,11 @@ static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
> return ;
> }
>
> -/*
> - * if per-inode prealloc list is too long, trim some PA
> - */
> -static void ext4_mb_trim_inode_pa(struct inode *inode)
> -{
> - struct ext4_inode_info *ei = EXT4_I(inode);
> - struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
> - int count, delta;
> -
> - count = atomic_read(&ei->i_prealloc_active);
> - delta = (sbi->s_mb_max_inode_prealloc >> 2) + 1;
> - if (count > sbi->s_mb_max_inode_prealloc + delta) {
> - count -= sbi->s_mb_max_inode_prealloc;
> - ext4_discard_preallocations(inode, count);
> - }
> -}
> -
> /*
> * release all resource we used in allocation
> */
> static int ext4_mb_release_context(struct ext4_allocation_context *ac)
> {
> - struct inode *inode = ac->ac_inode;
> struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
> struct ext4_prealloc_space *pa = ac->ac_pa;
> if (pa) {
> @@ -5595,7 +5576,6 @@ static int ext4_mb_release_context(struct ext4_allocation_context *ac)
> if (ac->ac_flags & EXT4_MB_HINT_GROUP_ALLOC)
> mutex_unlock(&ac->ac_lg->lg_mutex);
> ext4_mb_collect_stats(ac);
> - ext4_mb_trim_inode_pa(inode);
> return 0;
> }
>
> diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
> index f8e8ee493867..6d85ee8674a6 100644
> --- a/fs/ext4/mballoc.h
> +++ b/fs/ext4/mballoc.h
> @@ -73,11 +73,6 @@
> */
> #define MB_DEFAULT_GROUP_PREALLOC 512
>
> -/*
> - * maximum length of inode prealloc list
> - */
> -#define MB_DEFAULT_MAX_INODE_PREALLOC 512
> -
> /*
> * Number of groups to search linearly before performing group scanning
> * optimization.
> diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c
> index d233c24ea342..f0d42cf44c71 100644
> --- a/fs/ext4/sysfs.c
> +++ b/fs/ext4/sysfs.c
> @@ -214,7 +214,6 @@ EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
> EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
> EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
> EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
> -EXT4_RW_ATTR_SBI_UI(mb_max_inode_prealloc, s_mb_max_inode_prealloc);
> EXT4_RW_ATTR_SBI_UI(mb_max_linear_groups, s_mb_max_linear_groups);
> EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb);
> EXT4_ATTR(trigger_fs_error, 0200, trigger_test_error);
> @@ -264,7 +263,6 @@ static struct attribute *ext4_attrs[] = {
> ATTR_LIST(mb_order2_req),
> ATTR_LIST(mb_stream_req),
> ATTR_LIST(mb_group_prealloc),
> - ATTR_LIST(mb_max_inode_prealloc),
> ATTR_LIST(mb_max_linear_groups),
> ATTR_LIST(max_writeback_mb_bump),
> ATTR_LIST(extent_max_zeroout_kb),
> --
> 2.31.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR

\
 
 \ /
  Last update: 2022-10-10 11:40    [W:1.645 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site