lkml.org 
[lkml]   [2022]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] [v3] x86/sgx: Fix NULL pointer dereference on non-SGX systems
On Fri, Jan 07, 2022 at 01:47:00PM +0200, Jarkko Sakkinen wrote:
> On Tue, Jan 04, 2022 at 09:15:27AM -0800, Dave Hansen wrote:
> >
> > From: Dave Hansen <dave.hansen@linux.intel.com>
> >
> > == Problem ==
> >
> > Nathan Chancellor reported an oops when aceessing the
> > 'sgx_total_bytes' sysfs file:
> >
> > https://lore.kernel.org/all/YbzhBrimHGGpddDM@archlinux-ax161/
> >
> > The sysfs output code accesses the sgx_numa_nodes[] array
> > unconditionally. However, this array is allocated during SGX
> > initialization, which only occurs on systems where SGX is
> > supported.
> >
> > If the sysfs file is accessed on systems without SGX support,
> > sgx_numa_nodes[] is NULL and an oops occurs.
> >
> > == Solution ==
> >
> > To fix this, hide the entire nodeX/x86/ attribute group on
> > systems without SGX support using the ->is_visible attribute
> > group callback.
> >
> > Unfortunately, SGX is initialized via a device_initcall() which
> > occurs _after_ the ->is_visible() callback. Instead of moving
> > SGX initialization earlier, call sysfs_update_group() during
> > SGX initialization to update the group visiblility.
> >
> > This update requires moving the SGX sysfs code earlier in
> > sgx/main.c. There are no code changes other than the addition of
> > arch_update_sysfs_visibility() and a minor whitespace fixup to
> > arch_node_attr_is_visible() which checkpatch caught.
> >
> > Fixes: 50468e431335 ("x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node")
> > Reported-by: Nathan Chancellor <nathan@kernel.org>
> > Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
> > CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Jarkko Sakkinen <jarkko@kernel.org>
> > Cc: linux-sgx@vger.kernel.org
> > Cc: x86@kernel.org
> > ---
> >
> > b/arch/x86/kernel/cpu/sgx/main.c | 65 ++++++++++++++++++++++++++++-----------
> > 1 file changed, 47 insertions(+), 18 deletions(-)
> >
> > diff -puN arch/x86/kernel/cpu/sgx/main.c~sgx-null-ptr arch/x86/kernel/cpu/sgx/main.c
> > --- a/arch/x86/kernel/cpu/sgx/main.c~sgx-null-ptr 2021-12-20 07:56:38.309584807 -0800
> > +++ b/arch/x86/kernel/cpu/sgx/main.c 2022-01-04 08:43:17.042821249 -0800
> > @@ -6,11 +6,13 @@
> > #include <linux/highmem.h>
> > #include <linux/kthread.h>
> > #include <linux/miscdevice.h>
> > +#include <linux/node.h>
> > #include <linux/pagemap.h>
> > #include <linux/ratelimit.h>
> > #include <linux/sched/mm.h>
> > #include <linux/sched/signal.h>
> > #include <linux/slab.h>
> > +#include <linux/sysfs.h>
> > #include <asm/sgx.h>
> > #include "driver.h"
> > #include "encl.h"
> > @@ -780,6 +782,48 @@ static inline u64 __init sgx_calc_sectio
> > ((high & GENMASK_ULL(19, 0)) << 32);
> > }
> >
> > +#ifdef CONFIG_NUMA
> > +static ssize_t sgx_total_bytes_show(struct device *dev, struct device_attribute *attr, char *buf)
> > +{
> > + return sysfs_emit(buf, "%lu\n", sgx_numa_nodes[dev->id].size);
> > +}
> > +static DEVICE_ATTR_RO(sgx_total_bytes);
> > +
> > +static umode_t arch_node_attr_is_visible(struct kobject *kobj,
> > + struct attribute *attr, int idx)
> > +{
> > + /* Make all x86/ attributes invisible when SGX is not initialized: */
> > + if (nodes_empty(sgx_numa_mask))
> > + return 0;
> > +
> > + return attr->mode;
> > +}
> > +
> > +static struct attribute *arch_node_dev_attrs[] = {
> > + &dev_attr_sgx_total_bytes.attr,
> > + NULL,
> > +};
> > +
> > +const struct attribute_group arch_node_dev_group = {
> > + .name = "x86",
> > + .attrs = arch_node_dev_attrs,
> > + .is_visible = arch_node_attr_is_visible,
> > +};
> > +
> > +static void __init arch_update_sysfs_visibility(int nid)
> > +{
> > + struct node *node = node_devices[nid];
> > + int ret;
> > +
> > + ret = sysfs_update_group(&node->dev.kobj, &arch_node_dev_group);
> > +
> > + if (ret)
> > + pr_err("sysfs update failed (%d), files may be invisible", ret);
> > +}
> > +#else /* !CONFIG_NUMA */
> > +static void __init arch_update_sysfs_visibility(int nid) {}
> > +#endif
> > +
> > static bool __init sgx_page_cache_init(void)
> > {
> > u32 eax, ebx, ecx, edx, type;
> > @@ -826,6 +870,9 @@ static bool __init sgx_page_cache_init(v
> > INIT_LIST_HEAD(&sgx_numa_nodes[nid].sgx_poison_page_list);
> > node_set(nid, sgx_numa_mask);
> > sgx_numa_nodes[nid].size = 0;
> > +
> > + /* Make SGX-specific node sysfs files visible: */
> > + arch_update_sysfs_visibility(nid);
> > }
> >
> > sgx_epc_sections[i].node = &sgx_numa_nodes[nid];
> > @@ -903,24 +950,6 @@ int sgx_set_attribute(unsigned long *all
> > }
> > EXPORT_SYMBOL_GPL(sgx_set_attribute);
> >
> > -#ifdef CONFIG_NUMA
> > -static ssize_t sgx_total_bytes_show(struct device *dev, struct device_attribute *attr, char *buf)
> > -{
> > - return sysfs_emit(buf, "%lu\n", sgx_numa_nodes[dev->id].size);
> > -}
> > -static DEVICE_ATTR_RO(sgx_total_bytes);
> > -
> > -static struct attribute *arch_node_dev_attrs[] = {
> > - &dev_attr_sgx_total_bytes.attr,
> > - NULL,
> > -};
> > -
> > -const struct attribute_group arch_node_dev_group = {
> > - .name = "x86",
> > - .attrs = arch_node_dev_attrs,
> > -};
> > -#endif /* CONFIG_NUMA */
> > -
> > static int __init sgx_init(void)
> > {
> > int ret;
> > _
>
> Please add both:
>
> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
> Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
>
> I explained the testing procedure in the other email.

To add: I tested both this final version and also the earlier
attached version.

/Jarkko

\
 
 \ /
  Last update: 2022-01-07 12:54    [W:0.426 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site