lkml.org 
[lkml]   [2022]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/9] mtd: rawnand: brcmnand: Allow working without interrupts
Date
The BCMA devices include the brcmnand controller but they do not wire up
any interrupt line, allow the main interrupt to be optional and update
the completion path to also check for the lack of an interrupt line.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 54 +++++++++++-------------
1 file changed, 24 insertions(+), 30 deletions(-)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index eb3f96489f83..08e2acde5133 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -216,7 +216,7 @@ struct brcmnand_controller {
void __iomem *nand_base;
void __iomem *nand_fc; /* flash cache */
void __iomem *flash_dma_base;
- unsigned int irq;
+ int irq;
unsigned int dma_irq;
int nand_version;

@@ -1610,7 +1610,7 @@ static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
bool err = false;
int sts;

- if (mtd->oops_panic_write) {
+ if (mtd->oops_panic_write || ctrl->irq < 0) {
/* switch to interrupt polling and PIO mode */
disable_ctrl_irqs(ctrl);
sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
@@ -3144,35 +3144,29 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
}

/* IRQ */
- ctrl->irq = platform_get_irq(pdev, 0);
- if ((int)ctrl->irq < 0) {
- dev_err(dev, "no IRQ defined\n");
- ret = -ENODEV;
- goto err;
- }
-
- /*
- * Some SoCs integrate this controller (e.g., its interrupt bits) in
- * interesting ways
- */
- if (soc) {
- ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
- DRV_NAME, ctrl);
+ ctrl->irq = platform_get_irq_optional(pdev, 0);
+ if (ctrl->irq > 0) {
+ /*
+ * Some SoCs integrate this controller (e.g., its interrupt bits) in
+ * interesting ways
+ */
+ if (soc) {
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
+ DRV_NAME, ctrl);

- /* Enable interrupt */
- ctrl->soc->ctlrdy_ack(ctrl->soc);
- ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
- if (brcmnand_soc_has_ops(soc))
- static_branch_enable(&brcmnand_soc_has_ops_key);
- } else {
- /* Use standard interrupt infrastructure */
- ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
- DRV_NAME, ctrl);
- }
- if (ret < 0) {
- dev_err(dev, "can't allocate IRQ %d: error %d\n",
- ctrl->irq, ret);
- goto err;
+ /* Enable interrupt */
+ ctrl->soc->ctlrdy_ack(ctrl->soc);
+ ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+ } else {
+ /* Use standard interrupt infrastructure */
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
+ DRV_NAME, ctrl);
+ }
+ if (ret < 0) {
+ dev_err(dev, "can't allocate IRQ %d: error %d\n",
+ ctrl->irq, ret);
+ goto err;
+ }
}

for_each_available_child_of_node(dn, child) {
--
2.25.1
\
 
 \ /
  Last update: 2022-01-07 01:15    [W:0.737 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site