lkml.org 
[lkml]   [2022]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: ipq8074: add SMEM support
Date
IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already
supported by the kernel add the required DT nodes.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
Changes in v2:
* Use the MMIO TCSR binding
* Use the updated SMEM binding directly under reserved-memory node
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index e6cc261201ef..bd70092b7156 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -76,6 +76,20 @@ psci {
method = "smc";
};

+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smem@4ab00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x4ab00000 0x0 0x00100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 0>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq8074", "qcom,scm";
@@ -331,6 +345,12 @@ gcc: gcc@1800000 {
#reset-cells = <0x1>;
};

+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
--
2.34.1
\
 
 \ /
  Last update: 2022-01-06 22:25    [W:0.031 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site