lkml.org 
[lkml]   [2022]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 1/2] ahci: Rename flag `ATA_LFLAG_NO_DB_DELAY` to `ATA_LFLAG_NO_DEBOUNCE_DELAY`
From
On 1/6/22 16:35, Paul Menzel wrote:
> Dear Damien,
>
>
> Am 06.01.22 um 03:52 schrieb Damien Le Moal:
>> On 1/6/22 00:36, Paul Menzel wrote:
>>> The new name is longer, but clearer.
>>
>> It looks like you sent an incremental change on top of your previous
>> patches. Please send a cleaned up series. One patch to introduce the
>> ATA_LFLAG_NO_DEBOUNCE_DELAY flag & msleep bypass and another to add the
>> AMD chipset.
>>
>> The commit message of this version patch 2 should be the explanation for
>> the ATA_LFLAG_NO_DEBOUNCE_DELAY flag, not for adding a new chipset ID.
>
> Sorry, but I think you misread the patch. The flag
> `ATA_LFLAG_NO_DB_DELAY` exists since commit e39b2bb3b7 (libata: skip
> debounce delay on link resume).

Arg. Indeed. Ignore my comment :)

Let's wait to see if there are any more comments and I will queue this
up for 5.17.

Going forward, it would be interesting to work on reversing the default:
no delay by default and mark all old & unknown adapters as needing the
delay. As you mentioned, most modern AHCI adapters most likely do not
need it.

Are you willing to take this and send a patches ?

>
>
> Kind regards,
>
> Paul
>
>
>>> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
>>> ---
>>> drivers/ata/ahci_brcm.c | 2 +-
>>> drivers/ata/libata-sata.c | 2 +-
>>> include/linux/libata.h | 2 +-
>>> 3 files changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
>>> index 6e9c5ade4c2ea..649815c196ed0 100644
>>> --- a/drivers/ata/ahci_brcm.c
>>> +++ b/drivers/ata/ahci_brcm.c
>>> @@ -333,7 +333,7 @@ static struct ata_port_operations ahci_brcm_platform_ops = {
>>>
>>> static const struct ata_port_info ahci_brcm_port_info = {
>>> .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
>>> - .link_flags = ATA_LFLAG_NO_DB_DELAY,
>>> + .link_flags = ATA_LFLAG_NO_DEBOUNCE_DELAY,
>>> .pio_mask = ATA_PIO4,
>>> .udma_mask = ATA_UDMA6,
>>> .port_ops = &ahci_brcm_platform_ops,
>>> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
>>> index b9c77885b8726..67b2e7cf3cc4e 100644
>>> --- a/drivers/ata/libata-sata.c
>>> +++ b/drivers/ata/libata-sata.c
>>> @@ -317,7 +317,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
>>> * immediately after resuming. Delay 200ms before
>>> * debouncing.
>>> */
>>> - if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
>>> + if (!(link->flags & ATA_LFLAG_NO_DEBOUNCE_DELAY))
>>> ata_msleep(link->ap, 200);
>>>
>>> /* is SControl restored correctly? */
>>> diff --git a/include/linux/libata.h b/include/linux/libata.h
>>> index 2a8404b26083c..15802e644962d 100644
>>> --- a/include/linux/libata.h
>>> +++ b/include/linux/libata.h
>>> @@ -191,7 +191,7 @@ enum {
>>> ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */
>>> ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */
>>> ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */
>>> - ATA_LFLAG_NO_DB_DELAY = (1 << 11), /* no debounce delay on link resume */
>>> + ATA_LFLAG_NO_DEBOUNCE_DELAY = (1 << 11), /* no debounce delay on link resume */
>>>
>>> /* struct ata_port flags */
>>> ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
>>
>>


--
Damien Le Moal
Western Digital Research

\
 
 \ /
  Last update: 2022-01-06 08:56    [W:0.054 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site