lkml.org 
[lkml]   [2022]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] gpio: ts5500: Use platform_get_irq() to get the interrupt
On Wed, Dec 22, 2021 at 6:19 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypassed the hierarchical setup and messed up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> drivers/gpio/gpio-ts5500.c | 11 ++++-------
> 1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
> index c91890488402..b159e92a3612 100644
> --- a/drivers/gpio/gpio-ts5500.c
> +++ b/drivers/gpio/gpio-ts5500.c
> @@ -317,22 +317,19 @@ static int ts5500_dio_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> const char *name = dev_name(dev);
> struct ts5500_priv *priv;
> - struct resource *res;
> unsigned long flags;
> int ret;
>
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> - if (!res) {
> - dev_err(dev, "missing IRQ resource\n");
> - return -EINVAL;
> - }
> + ret = platform_get_irq(pdev, 0);
> + if (ret < 0)
> + return ret;
>
> priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> platform_set_drvdata(pdev, priv);
> - priv->hwirq = res->start;
> + priv->hwirq = ret;
> spin_lock_init(&priv->lock);
>
> priv->gpio_chip.owner = THIS_MODULE;
> --
> 2.17.1
>

Applied, thanks!

Bart

\
 
 \ /
  Last update: 2022-01-05 10:25    [W:0.117 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site