lkml.org 
[lkml]   [2022]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] sun7i-a20-marsboard.dts: add marsboard-a20 support
On Sat, Dec 25, 2021 at 12:43:41AM +0800, conleylee@foxmail.com wrote:
> From: Conley Lee <conleylee@foxmail.com>
>
> ARM dts: sun7i: Add Marsboard A20 board
>
> This patch add support for Marsboard A20 board.
>
> The Marsboard A20 is a A20 based SBC with 1G RAM, 8G Flash, micro SD
> card slot , SATA socketm 10/100 ethernet, HDMI port, 4 USB2.0 ports, 2
> USB2.0 OTG, USB WIFI(RTL8188EU) with antenna.
>
> Signed-off-by: Conley Lee <conleylee@foxmail.com>
> ---
> .../devicetree/bindings/arm/sunxi.yaml | 5 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun7i-a20-marsboard.dts | 220 ++++++++++++++++++

Bindings and dts files should be separate patches.

> 3 files changed, 226 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-marsboard.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
> index 889128acf49a..4bd93ae26bd1 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> @@ -444,6 +444,11 @@ properties:
> - const: haoyu,a10-marsboard
> - const: allwinner,sun4i-a10
>
> + - description: HAOYU Electronics Marsboard A20
> + items:
> + - const: haoyu,a20-marsboard
> + - const: allwinner,sun7i-a20
> +
> - description: MapleBoard MP130
> items:
> - const: mapleboard,mp130
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0de64f237cd8..4628a2617313 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1219,6 +1219,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-icnova-swac.dtb \
> sun7i-a20-lamobo-r1.dtb \
> sun7i-a20-linutronix-testbox-v2.dtb \
> + sun7i-a20-marsboard.dtb \
> sun7i-a20-m3.dtb \
> sun7i-a20-mk808c.dtb \
> sun7i-a20-olimex-som-evb.dtb \
> diff --git a/arch/arm/boot/dts/sun7i-a20-marsboard.dts b/arch/arm/boot/dts/sun7i-a20-marsboard.dts
> new file mode 100644
> index 000000000000..159e69e148e7
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-marsboard.dts
> @@ -0,0 +1,220 @@
> +/*
> + * Copyright 2021 Conley Lee
> + * Conley Lee <conleylee@foxmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.

Use SPDX tag instead.

> + */
> +
> +/dts-v1/;
> +#include "sun7i-a20.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "HAOYU Electronics Marsboard A20";
> + compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +};
> +
> +&ahci {
> + target-supply = <&reg_ahci_5v>;
> + status = "okay";
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&reg_dcdc2>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&gmac_mii_pins {
> + pins = "PA0", "PA1", "PA2",
> + "PA3", "PA4", "PA5", "PA6",
> + "PA7", "PA8", "PA9", "PA10",
> + "PA11", "PA12", "PA13", "PA14",
> + "PA15", "PA16", "PA17";
> +};
> +
> +&gmac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac_mii_pins>;
> + phy-handle = <&phy0>;
> + phy-mode = "mii";
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + axp209: pmic@34 {
> + reg = <0x34>;
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <&reg_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
> + status = "okay";
> +};
> +
> +&gmac_mdio {
> + phy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&reg_ahci_5v {
> + status = "okay";
> +};
> +
> +#include "axp209.dtsi"
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&reg_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1450000>;
> + regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-int-dll";
> +};
> +
> +&reg_ldo1 {
> + regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "avcc";
> +};
> +
> +&reg_usb1_vbus {
> + status = "okay";
> +};
> +
> +&reg_usb2_vbus {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pb_pins>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
> + usb1_vbus-supply = <&reg_usb1_vbus>;
> + usb2_vbus-supply = <&reg_usb2_vbus>;
> + status = "okay";
> +};
> --
> 2.34.1
>
>

\
 
 \ /
  Last update: 2022-01-04 22:00    [W:0.127 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site