lkml.org 
[lkml]   [2022]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] staging: media: atomisp: Use BIT macro instead of left shifting
From
Date
On Mon, 2022-01-31 at 10:36 +0300, Dan Carpenter wrote:
> On Sun, Jan 30, 2022 at 07:06:55PM +0100, Moses Christopher Bollavarapu wrote:
> > There is a BIT(nr) macro available in Linux Kernel,
> > which does the same thing.
> > Example: BIT(7) = (1UL << 7)
> >
> > Also use GENMASK for masking
> > Example: GENMASK(3, 0) = 0b00001111 (same as (1 << 4) - 1)
> >
> > Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
>
> This patch does a couple unrelated things. Break out the GENMASK()
> change into its own patch.
>
> > @@ -65,7 +66,7 @@ enum ia_css_fw_type {
> > ia_css_sp_firmware, /** Firmware for the SP */
> > ia_css_isp_firmware, /** Firmware for the ISP */
> > ia_css_bootloader_firmware, /** Firmware for the BootLoader */
> > - ia_css_acc_firmware /** Firmware for accelrations */
> > + ia_css_acc_firmware, /** Firmware for accelrations */
> > };
>
> This change needs to be in its own patch.

Because it's unrelated. As is the repetitive use of 'Firmware for'
and the typo/misspelling of accelerations.

Another possibility would be to change the /** to /* or maybe
change to // and remove the ' */' trailing comment termination
also in a separate patch.

> > diff --git a/drivers/staging/media/atomisp/pci/ia_css_env.h b/drivers/staging/media/atomisp/pci/ia_css_env.h
[]
> > enum ia_css_rx_irq_info {
> > - IA_CSS_RX_IRQ_INFO_BUFFER_OVERRUN = 1U << 0, /** buffer overrun */
> > - IA_CSS_RX_IRQ_INFO_ENTER_SLEEP_MODE = 1U << 1, /** entering sleep mode */
> > - IA_CSS_RX_IRQ_INFO_EXIT_SLEEP_MODE = 1U << 2, /** exited sleep mode */
> > - IA_CSS_RX_IRQ_INFO_ECC_CORRECTED = 1U << 3, /** ECC corrected */
> > - IA_CSS_RX_IRQ_INFO_ERR_SOT = 1U << 4,
> > + IA_CSS_RX_IRQ_INFO_BUFFER_OVERRUN = BIT(0), /** buffer overrun */
> > + IA_CSS_RX_IRQ_INFO_ENTER_SLEEP_MODE = BIT(1), /** entering sleep mode */
> > + IA_CSS_RX_IRQ_INFO_EXIT_SLEEP_MODE = BIT(2), /** exited sleep mode */
> > + IA_CSS_RX_IRQ_INFO_ECC_CORRECTED = BIT(3), /** ECC corrected */
> > + IA_CSS_RX_IRQ_INFO_ERR_SOT = BIT(4),
> > /** Start of transmission */
> > - IA_CSS_RX_IRQ_INFO_ERR_SOT_SYNC = 1U << 5, /** SOT sync (??) */
> > - IA_CSS_RX_IRQ_INFO_ERR_CONTROL = 1U << 6, /** Control (??) */
> > - IA_CSS_RX_IRQ_INFO_ERR_ECC_DOUBLE = 1U << 7, /** Double ECC */
> > - IA_CSS_RX_IRQ_INFO_ERR_CRC = 1U << 8, /** CRC error */
> > - IA_CSS_RX_IRQ_INFO_ERR_UNKNOWN_ID = 1U << 9, /** Unknown ID */
> > - IA_CSS_RX_IRQ_INFO_ERR_FRAME_SYNC = 1U << 10,/** Frame sync error */
> > - IA_CSS_RX_IRQ_INFO_ERR_FRAME_DATA = 1U << 11,/** Frame data error */
> > - IA_CSS_RX_IRQ_INFO_ERR_DATA_TIMEOUT = 1U << 12,/** Timeout occurred */
> > - IA_CSS_RX_IRQ_INFO_ERR_UNKNOWN_ESC = 1U << 13,/** Unknown escape seq. */
> > - IA_CSS_RX_IRQ_INFO_ERR_LINE_SYNC = 1U << 14,/** Line Sync error */
> > - IA_CSS_RX_IRQ_INFO_INIT_TIMEOUT = 1U << 15,
> > + IA_CSS_RX_IRQ_INFO_ERR_SOT_SYNC = BIT(5), /** SOT sync (??) */
> > + IA_CSS_RX_IRQ_INFO_ERR_CONTROL = BIT(6), /** Control (??) */
> > + IA_CSS_RX_IRQ_INFO_ERR_ECC_DOUBLE = BIT(7), /** Double ECC */
> > + IA_CSS_RX_IRQ_INFO_ERR_CRC = BIT(8), /** CRC error */
> > + IA_CSS_RX_IRQ_INFO_ERR_UNKNOWN_ID = BIT(9), /** Unknown ID */
> > + IA_CSS_RX_IRQ_INFO_ERR_FRAME_SYNC = BIT(10),/** Frame sync error */
> > + IA_CSS_RX_IRQ_INFO_ERR_FRAME_DATA = BIT(11),/** Frame data error */
> > + IA_CSS_RX_IRQ_INFO_ERR_DATA_TIMEOUT = BIT(12),/** Timeout occurred */
> > + IA_CSS_RX_IRQ_INFO_ERR_UNKNOWN_ESC = BIT(13),/** Unknown escape seq. */
> > + IA_CSS_RX_IRQ_INFO_ERR_LINE_SYNC = BIT(14),/** Line Sync error */
>
> The comment is kind of messed up. There should be a space after the
> comma and just /* Line Sync error */

or just a tab before all of the comments


\
 
 \ /
  Last update: 2022-01-31 14:34    [W:0.075 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site