lkml.org 
[lkml]   [2022]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RESEND 0/4] hwmon: (sch56xx) Automatically load on supported hardware
From
Hi Armin,

On 1/31/22 10:37, Armin Wolf wrote:
> The hardware monitoring solutions supported by the sch5627 and
> sch5636 drivers are Fujitsu-specific.
> After some online searching, i found out that the solution used
> with the SCH5627 is called "Antiope" by Fujitsu, just like the
> "Theseus" solution inside the SCH5636.
> I also found out that "Antiope" and "Theseus" are listed as
> DMI onboard devices on supported Fujitsu devices, so the
> sch56xx_common module can be loaded automatically an check
> for the DMI devices. However some devices like the Esprimo C700
> have both devices, so after verifying that at least one onboard
> device is present, sch56xx_common still has to detect which chip
> is present.
> This is safe however if at least one device is present.
>
> Tested on a Fujitsu Esprimo P720.
>
> Armin Wolf (4):
> hwmon: (sch56xx) Autoload modules on platform device creation
> hwmon: (sch56xx-common) Add automatic module loading on supported
> devices
> hwmon: (sch56xx-common) Replace msleep() with usleep_range()
> hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING

Not sure why you did a resend? I received the original just fine ?

With that said the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans

>
> drivers/hwmon/sch5627.c | 9 +++++++
> drivers/hwmon/sch5636.c | 9 +++++++
> drivers/hwmon/sch56xx-common.c | 44 ++++++++++++++++++++++++++++++----
> 3 files changed, 58 insertions(+), 4 deletions(-)
>
> --
> 2.30.2
>

\
 
 \ /
  Last update: 2022-01-31 10:46    [W:0.077 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site