lkml.org 
[lkml]   [2022]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 9/9] mtd: rawnand: brcmnand: Add BCMA shim
Hi Florian,

f.fainelli@gmail.com wrote on Wed, 22 Dec 2021 16:22:25 -0800:

> Add a BCMA shim to allow us to register the brcmnand driver using the
> BCMA bus which provides indirect memory mapped access to SoC registers.
>
> There are a number of registers that need to be byte swapped because
> they are natively big endian, coming directly from the NAND chip, and
> there is no bus interface unlike the iProc or STB platforms that
> performs the byte swapping for us.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> drivers/mtd/nand/raw/Kconfig | 11 ++
> drivers/mtd/nand/raw/brcmnand/Makefile | 2 +
> drivers/mtd/nand/raw/brcmnand/bcma_nand.c | 131 ++++++++++++++++++++++
> 3 files changed, 144 insertions(+)
> create mode 100644 drivers/mtd/nand/raw/brcmnand/bcma_nand.c
>
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 0a45d3c6c15b..f643e02e5559 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -208,6 +208,17 @@ config MTD_NAND_BRCMNAND
> originally designed for Set-Top Box but is used on various BCM7xxx,
> BCM3xxx, BCM63xxx, iProc/Cygnus and more.
>
> +if MTD_NAND_BRCMNAND
> +
> +config MTD_NAND_BRCMNAND_BCMA
> + tristate "Broadcom BCMA NAND controller"
> + depends on BCMA_NFLASH
> + depends on BCMA
> + help
> + Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
> +
> +endif # MTD_NAND_BRCMNAND
> +
> config MTD_NAND_BCM47XXNFLASH
> tristate "BCM4706 BCMA NAND controller"
> depends on BCMA_NFLASH
> diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile
> index 195b845e48b8..16dc7254200e 100644
> --- a/drivers/mtd/nand/raw/brcmnand/Makefile
> +++ b/drivers/mtd/nand/raw/brcmnand/Makefile
> @@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63138_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm6368_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmstb_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand.o
> +
> +obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA) += bcma_nand.o
> diff --git a/drivers/mtd/nand/raw/brcmnand/bcma_nand.c b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
> new file mode 100644
> index 000000000000..e3be9ecf0761
> --- /dev/null
> +++ b/drivers/mtd/nand/raw/brcmnand/bcma_nand.c
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright © 2021 Broadcom
> + */
> +#include <linux/bcma/bcma.h>
> +#include <linux/bcma/bcma_driver_chipcommon.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +#include "brcmnand.h"
> +
> +struct brcmnand_bcma_soc {
> + struct brcmnand_soc soc;
> + struct bcma_drv_cc *cc;
> +};
> +
> +static inline bool brcmnand_bcma_needs_swapping(u32 offset)
> +{
> + switch (offset) {
> + case BCMA_CC_NAND_SPARE_RD0:
> + case BCMA_CC_NAND_SPARE_RD4:
> + case BCMA_CC_NAND_SPARE_RD8:
> + case BCMA_CC_NAND_SPARE_RD12:
> + case BCMA_CC_NAND_SPARE_WR0:
> + case BCMA_CC_NAND_SPARE_WR4:
> + case BCMA_CC_NAND_SPARE_WR8:
> + case BCMA_CC_NAND_SPARE_WR12:
> + case BCMA_CC_NAND_DEVID:
> + case BCMA_CC_NAND_DEVID_X:
> + case BCMA_CC_NAND_SPARE_RD16:
> + case BCMA_CC_NAND_SPARE_RD20:
> + case BCMA_CC_NAND_SPARE_RD24:
> + case BCMA_CC_NAND_SPARE_RD28:
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static u32 brcmnand_bcma_read_reg(struct brcmnand_soc *soc, u32 offset)
> +{
> + struct brcmnand_bcma_soc *sc;
> + u32 val;
> +
> + sc = container_of(soc, struct brcmnand_bcma_soc, soc);
> +
> + /* Offset into the NAND block and deal with the flash cache separately */
> + if (offset == ~0)
> + offset = BCMA_CC_NAND_CACHE_DATA;
> + else
> + offset += BCMA_CC_NAND_REVISION;
> +
> + val = bcma_cc_read32(sc->cc, offset);
> +
> + /* Swap if necessary */
> + if (brcmnand_bcma_needs_swapping(offset))
> + val = be32_to_cpu(val);
> + return val;
> +}
> +
> +static void brcmnand_bcma_write_reg(struct brcmnand_soc *soc, u32 val,
> + u32 offset)
> +{
> + struct brcmnand_bcma_soc *sc;
> +
> + sc = container_of(soc, struct brcmnand_bcma_soc, soc);
> +
> + /* Offset into the NAND block */
> + if (offset == ~0)
> + offset = BCMA_CC_NAND_CACHE_DATA;
> + else
> + offset += BCMA_CC_NAND_REVISION;
> +
> + /* Swap if necessary */
> + if (brcmnand_bcma_needs_swapping(offset))
> + val = cpu_to_be32(val);
> +
> + bcma_cc_write32(sc->cc, offset, val);
> +}
> +
> +static struct brcmnand_io_ops brcmnand_bcma_io_ops = {
> + .read_reg = brcmnand_bcma_read_reg,
> + .write_reg = brcmnand_bcma_write_reg,
> +};
> +
> +static void brcmnand_bcma_prepare_data_bus(struct brcmnand_soc *soc, bool prepare,
> + bool is_param)
> +{
> + struct brcmnand_bcma_soc *sc;
> +
> + sc = container_of(soc, struct brcmnand_bcma_soc, soc);

A helper for that would be nice?

Otherwise looks good.

> +
> + bcma_cc_write32(sc->cc, BCMA_CC_NAND_CACHE_ADDR, 0);
> +}
> +
> +static int brcmnand_bcma_nand_probe(struct platform_device *pdev)
> +{
> + struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
> + struct brcmnand_bcma_soc *soc;
> +
> + soc = devm_kzalloc(&pdev->dev, sizeof(*soc), GFP_KERNEL);
> + if (!soc)
> + return -ENOMEM;
> +
> + soc->cc = container_of(nflash, struct bcma_drv_cc, nflash);
> + soc->soc.prepare_data_bus = brcmnand_bcma_prepare_data_bus;
> + soc->soc.ops = &brcmnand_bcma_io_ops;
> +
> + if (soc->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
> + dev_err(&pdev->dev, "Use bcm47xxnflash for 4706!\n");
> + return -ENODEV;
> + }
> +
> + return brcmnand_probe(pdev, &soc->soc);
> +}
> +
> +static struct platform_driver brcmnand_bcma_nand_driver = {
> + .probe = brcmnand_bcma_nand_probe,
> + .remove = brcmnand_remove,
> + .driver = {
> + .name = "bcma_brcmnand",
> + .pm = &brcmnand_pm_ops,
> + }
> +};
> +module_platform_driver(brcmnand_bcma_nand_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Braodcom");
> +MODULE_DESCRIPTION("NAND driver for BCMA chips");


Thanks,
Miquèl

\
 
 \ /
  Last update: 2022-01-03 18:07    [W:0.224 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site