lkml.org 
[lkml]   [2022]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/9] Add MAX77714 PMIC minimal driver (RTC and watchdog only)
On 1/29/22 00:40, Luca Ceresoli wrote:
> Hi Lee, all,
>
> On 11/01/22 11:10, Luca Ceresoli wrote:
>> Hi All,
>>
>> On 11/12/21 18:59, Luca Ceresoli wrote:
>>> Hi,
>>>
>>> this series adds minimal drivers for the Maxim Semiconductor MAX77714
>>> (https://www.maximintegrated.com/en/products/power/power-management-ics/MAX77714.html).
>>> Only RTC and watchdog are implemented by these patches.
>>>
>>> All implemented functionality is tested and working: RTC read/write,
>>> watchdog start/stop/ping/set_timeout.
>>>
>>> Patches 1-3 + 6 are trivial cleanups to the max77686 drivers and Kconfig
>>> indentation and can probably be applied easily.
>>>
>>> Patches 4, 5, 7, 8 and 9 add: dt bindings, mfd driver, watchdog driver and
>>> rtc driver.
>>
>> A gentle ping about this series. It's at v5, all patches have at least
>> one ack/review tag and most patches are unchanged since ~v2. It applies
>> cleanly on current master.
>>
>> Is there anything I should do to help making progress?
>
> Apologies for pinging again... but as I got no further comments about
> these patches I guess I can really do nothing at the moment.
>
> Lee, is this series completely in charge to you or should it be applied
> by the respective subsystem maintainers?
>

I hesitated to take the watchdog patches because an earlier patch of the series
introduces MFD_MAX77714 and the watchdog Kconfig entry lists it as dependency.
I now added patch 7/9 and 8/9 to my watchdog-next tree anyway. If the mfd part
doesn't make it we can still decide to take it out at some point.

Note that patch 6/9 has already been applied.

Guenter

\
 
 \ /
  Last update: 2022-01-30 02:48    [W:0.059 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site