lkml.org 
[lkml]   [2022]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: BUG: Kernel NULL pointer dereference on write at 0x00000000 (rtmsg_ifinfo_build_skb)
Dear Paul,

Thank you for your instructions, I learned a lot from this process.

On Sun, Jan 30, 2022 at 12:52 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Zhouyi,
>
>
> Thank you for taking the time.
>
>
> Am 29.01.22 um 03:23 schrieb Zhouyi Zhou:
>
> > I don't have an IBM machine, but I tried to analyze the problem using
> > my x86_64 kvm virtual machine, I can't reproduce the bug using my
> > x86_64 kvm virtual machine.
>
> No idea, if it’s architecture specific.
>
> > I saw the panic is caused by registration of sit device (A sit device
> > is a type of virtual network device that takes our IPv6 traffic,
> > encapsulates/decapsulates it in IPv4 packets, and sends/receives it
> > over the IPv4 Internet to another host)
> >
> > sit device is registered in function sit_init_net:
> > 1895 static int __net_init sit_init_net(struct net *net)
> > 1896 {
> > 1897 struct sit_net *sitn = net_generic(net, sit_net_id);
> > 1898 struct ip_tunnel *t;
> > 1899 int err;
> > 1900
> > 1901 sitn->tunnels[0] = sitn->tunnels_wc;
> > 1902 sitn->tunnels[1] = sitn->tunnels_l;
> > 1903 sitn->tunnels[2] = sitn->tunnels_r;
> > 1904 sitn->tunnels[3] = sitn->tunnels_r_l;
> > 1905
> > 1906 if (!net_has_fallback_tunnels(net))
> > 1907 return 0;
> > 1908
> > 1909 sitn->fb_tunnel_dev = alloc_netdev(sizeof(struct ip_tunnel), "sit0",
> > 1910 NET_NAME_UNKNOWN,
> > 1911 ipip6_tunnel_setup);
> > 1912 if (!sitn->fb_tunnel_dev) {
> > 1913 err = -ENOMEM;
> > 1914 goto err_alloc_dev;
> > 1915 }
> > 1916 dev_net_set(sitn->fb_tunnel_dev, net);
> > 1917 sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops;
> > 1918 /* FB netdevice is special: we have one, and only one per netns.
> > 1919 * Allowing to move it to another netns is clearly unsafe.
> > 1920 */
> > 1921 sitn->fb_tunnel_dev->features |= NETIF_F_NETNS_LOCAL;
> > 1922
> > 1923 err = register_netdev(sitn->fb_tunnel_dev);
> > register_netdev on line 1923 will call if_nlmsg_size indirectly.
> >
> > On the other hand, the function that calls the paniced strlen is if_nlmsg_size:
> > (gdb) disassemble if_nlmsg_size
> > Dump of assembler code for function if_nlmsg_size:
> > 0xffffffff81a0dc20 <+0>: nopl 0x0(%rax,%rax,1)
> > 0xffffffff81a0dc25 <+5>: push %rbp
> > 0xffffffff81a0dc26 <+6>: push %r15
> > 0xffffffff81a0dd04 <+228>: je 0xffffffff81a0de20 <if_nlmsg_size+512>
> > 0xffffffff81a0dd0a <+234>: mov 0x10(%rbp),%rdi
> > ...
> > => 0xffffffff81a0dd0e <+238>: callq 0xffffffff817532d0 <strlen>
> > 0xffffffff81a0dd13 <+243>: add $0x10,%eax
> > 0xffffffff81a0dd16 <+246>: movslq %eax,%r12
>
> Excuse my ignorance, would that look the same for ppc64le?
> Unfortunately, I didn’t save the problematic `vmlinuz` file, but on a
> current build (without rcutorture) I have the line below, where strlen
> shows up.
>
> (gdb) disassemble if_nlmsg_size
> […]
> 0xc000000000f7f82c <+332>: bl 0xc000000000a10e30 <strlen>
> […]
>
> > and the C code for 0xffffffff81a0dd0e is following (line 524):
> > 515 static size_t rtnl_link_get_size(const struct net_device *dev)
> > 516 {
> > 517 const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
> > 518 size_t size;
> > 519
> > 520 if (!ops)
> > 521 return 0;
> > 522
> > 523 size = nla_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
> > 524 nla_total_size(strlen(ops->kind) + 1); /* IFLA_INFO_KIND */
>
> How do I connect the disassemby output with the corresponding line?
I use "make ARCH=powerpc CC=powerpc64le-linux-gnu-gcc-9
CROSS_COMPILE=powerpc64le-linux-gnu- -j 16" to cross compile kernel
for powerpc64le in my Ubuntu 20.04 x86_64.

gdb-multiarch ./vmlinux
(gdb)disassemble if_nlmsg_size
[...]
0xc00000000191bf40 <+112>: bl 0xc000000001c28ad0 <strlen>
[...]
(gdb) break *0xc00000000191bf40
Breakpoint 1 at 0xc00000000191bf40: file ./include/net/netlink.h, line 1112.

But in include/net/netlink.h:1112, I can't find the call to strlen
1110static inline int nla_total_size(int payload)
1111{
1112 return NLA_ALIGN(nla_attr_size(payload));
1113}
This may be due to the compiler wrongly encode the debug information, I guess.

>
> > But ops is assigned the value of sit_link_ops in function sit_init_net
> > line 1917, so I guess something must happened between the calls.
> >
> > Do we have KASAN in IBM machine? would KASAN help us find out what
> > happened in between?
>
> Unfortunately, KASAN is not support on Power, I have, as far as I can
> see. From `arch/powerpc/Kconfig`:
>
> select HAVE_ARCH_KASAN if PPC32 &&
> PPC_PAGE_SHIFT <= 14
> select HAVE_ARCH_KASAN_VMALLOC if PPC32 &&
> PPC_PAGE_SHIFT <= 14
>
en, agree, I invoke "make menuconfig ARCH=powerpc
CC=powerpc64le-linux-gnu-gcc-9 CROSS_COMPILE=powerpc64le-linux-gnu- -j
16", I can't find KASAN under Memory Debugging, I guess we should find
the bug by bisecting instead.

> > Hope I can be of more helpful.
>
> Some distributions support multi-arch, so they easily allow
> crosscompiling for different architectures.
I use "make ARCH=powerpc CC=powerpc64le-linux-gnu-gcc-9
CROSS_COMPILE=powerpc64le-linux-gnu- -j 16" to cross compile kernel
for powerpc64le in my Ubuntu 20.04 x86_64. But I can't boot the
compiled kernel using "qemu-system-ppc64le -M pseries -nographic -smp
4 -net none -m 4G -kernel arch/powerpc/boot/zImage". I will continue
to explore it.

Kind regards
Zhouyi

>
>
> Kind regards,
>
> Paul

\
 
 \ /
  Last update: 2022-01-30 01:22    [W:0.072 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site