lkml.org 
[lkml]   [2022]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
On Tue, Mar 23, 2021 at 09:43:26AM +0200, Tony Lindgren wrote:
> There is a timer wrap issue on dra7 for the ARM architected timer.
> In a typical clock configuration the timer fails to wrap after 388 days.
>
> To work around the issue, we need to use timer-ti-dm percpu timers instead.
>
> Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
> the issue if the dtb is not configured properly.

Hi Tony,

This causes a conflict for IPU2 which is using timer 3 and 4.

From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:

&ipu2 {
mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
ti,timers = <&timer3>;
ti,watchdog-timers = <&timer4>, <&timer9>;
};

I noticed an error ("could not get timer platform device") when booting
mainline on a BeagleBoard X15 (AM578):

omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
remoteproc remoteproc1: 55020000.ipu is available
remoteproc remoteproc1: powering up 55020000.ipu
remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3747220
omap-rproc 55020000.ipu: could not get timer platform device
omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
remoteproc remoteproc1: can't start rproc 55020000.ipu: -19

I switched this errata fix to use timer 15 and 16 instead which resolves
the error. Do you think that is an acceptable solution?

If so, I will post the patch to the list.

Thanks,
Drew

\
 
 \ /
  Last update: 2022-01-29 22:06    [W:0.099 / U:3.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site