lkml.org 
[lkml]   [2022]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/4] can: esd: add support for esd GmbH PCIe/402 CAN interface
On 27.01.2022 19:14:04, Stefan Mätje wrote:
> > The kernel takes care of printing a error message in case the DMA mem
> > allocation fails. This is why checkpatch asks you to remove that message.
>
> I've triggered a kernel failure message for the DMA allocation by exceeding
> the DMA allocation limit. If you say it is clear from that message that the
> DMA allocation fails (see included kernel messages below) I'll throw out the
> extra "DMA alloc failed" message from the esd_402_pci driver. The driver's
> message is shown for both boards in my computer while the kernel message
> is printed only once.
>
> See the kernel messages below.

> [ 778.083489] ------------[ cut here ]------------
> [ 778.083490] WARNING: CPU: 0 PID: 24545 at mm/page_alloc.c:5344 __alloc_pages+0x292/0x330
> [ 778.083496] Modules linked in: esd_402_pci(+) tcp_diag inet_diag unix_diag nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs
> lockd grace fscache netfs binfmt_misc nls_iso8859_1 intel_rapl_msr mei_hdcp intel_rapl_common snd_hda_codec_hdmi
> x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio coretemp kvm_intel kvm
> crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd snd_hda_intel snd_intel_dspcfg cryptd snd_intel_sdw_acpi rapl
> snd_hda_codec intel_cstate snd_hda_core esd_usb2 input_leds snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi i915
> serio_raw at24 efi_pstore video ttm snd_seq drm_kms_helper plx_pci sja1000 snd_seq_device cec snd_timer rc_core can_dev i2c_algo_bit
> snd fb_sys_fops syscopyarea sysfillrect mei_me sysimgblt soundcore mei mac_hid sch_fq_codel msr parport_pc ppdev lp drm parport
> sunrpc ip_tables x_tables autofs4 gpio_ich crc32_pclmul psmouse i2c_i801 r8169 realtek ahci i2c_smbus libahci lpc_ich wmi
> [ 778.083547] [last unloaded: esd_402_pci]
> [ 778.083549] CPU: 0 PID: 24545 Comm: modprobe Not tainted 5.16.0-rc7-gcc-9+ #2
> [ 778.083551] Hardware name: Acer Veriton M2610G/Veriton M2610G, BIOS P01-B1 06/18/2012
> [ 778.083553] RIP: 0010:__alloc_pages+0x292/0x330
> [ 778.083556] Code: d4 89 94 7e 0f 85 3d ff ff ff e8 e8 ab d2 ff e9 33 ff ff ff e8 bf cf fb ff 48 89 c7 e9 a5 fe ff ff 41 81 e4 00
> 20 00 00 75 8e <0f> 0b eb 8a a9 00 00 08 00 75 6a 44 89 e1 80 e1 7f a9 00 00 04 00
> [ 778.083557] RSP: 0018:ffffb4e84240b918 EFLAGS: 00010246
> [ 778.083559] RAX: 0000000000000000 RBX: 0000000000000a24 RCX: 0000000000000000
> [ 778.083561] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000a24
> [ 778.083562] RBP: ffffb4e84240b970 R08: 00000000ffffffff R09: 00000000ffffffff
> [ 778.083563] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
> [ 778.083564] R13: 000000000000000c R14: ffff9a08c0e3d0d0 R15: 0000000001000000
> [ 778.083565] FS: 00007f7d730df540(0000) GS:ffff9a09f7a00000(0000) knlGS:0000000000000000
> [ 778.083567] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 778.083568] CR2: 00007ffe83526b40 CR3: 0000000008128006 CR4: 00000000000606f0
> [ 778.083570] Call Trace:
> [ 778.083571] <TASK>
VVVVVVVVVVVVVVVVVVVVVVVV
> [ 778.083574] __dma_direct_alloc_pages+0x8e/0x120
> [ 778.083578] dma_direct_alloc+0x66/0x2a0
> [ 778.083580] dma_alloc_attrs+0x3e/0x50
^^^^^^^^^^^^^^^
> [ 778.083582] pci402_probe+0x211/0x64a [esd_402_pci]
> [ 778.083586] ? kernfs_link_sibling+0x99/0xe0
> [ 778.083590] local_pci_probe+0x4b/0x90
> [ 778.083594] ? pci_match_device+0xde/0x130
> [ 778.083597] pci_device_probe+0xd8/0x1d0
> [ 778.083600] really_probe+0x1d2/0x3d0
> [ 778.083604] __driver_probe_device+0x109/0x180
> [ 778.083607] driver_probe_device+0x23/0xa0
> [ 778.083610] __driver_attach+0xbd/0x160
> [ 778.083613] ? __device_attach_driver+0xe0/0xe0
> [ 778.083616] bus_for_each_dev+0x7e/0xc0
> [ 778.083619] driver_attach+0x1e/0x20
> [ 778.083621] bus_add_driver+0x152/0x1f0
> [ 778.083624] driver_register+0x74/0xd0
> [ 778.083626] ? 0xffffffffc0c2e000
> [ 778.083627] __pci_register_driver+0x68/0x70
> [ 778.083630] pci402_driver_init+0x23/0x1000 [esd_402_pci]
> [ 778.083633] do_one_initcall+0x48/0x210
> [ 778.083636] ? kmem_cache_alloc_trace+0x32e/0x3f0
> [ 778.083639] do_init_module+0x62/0x250
> [ 778.083641] load_module+0x261c/0x2890
> [ 778.083645] __do_sys_finit_module+0xbf/0x120
> [ 778.083646] ? __do_sys_finit_module+0xbf/0x120
> [ 778.083649] __x64_sys_finit_module+0x1a/0x20
> [ 778.083650] do_syscall_64+0x3b/0xc0
> [ 778.083654] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 778.083657] RIP: 0033:0x7f7d7322489d
> [ 778.083658] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b
> 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 f5 0c 00 f7 d8 64 89 01 48
> [ 778.083660] RSP: 002b:00007ffe83529b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
> [ 778.083662] RAX: ffffffffffffffda RBX: 000055db638f40d0 RCX: 00007f7d7322489d
> [ 778.083663] RDX: 0000000000000000 RSI: 000055db638f4730 RDI: 0000000000000003
> [ 778.083664] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
> [ 778.083665] R10: 0000000000000003 R11: 0000000000000246 R12: 000055db638f4730
> [ 778.083666] R13: 0000000000000000 R14: 000055db638f43e0 R15: 000055db638f40d0
> [ 778.083669] </TASK>
> [ 778.083670] ---[ end trace 8ac4b05d87d41ee5 ]---
> [ 778.083671] esd_402_pci 0000:01:00.0: DMA alloc failed!
> [ 778.083710] esd_402_pci: probe of 0000:01:00.0 failed with error -12
> [ 778.095803] esd_402_pci 0000:05:00.0: ESDACC v72, freq: 80000000/80000000, feat/strap: 0x3c90/0x3d, cores: 2/4
> [ 778.095810] acc_init_ov:146: esd_402_pci 0000:05:00.0: ESDACC ts2ns: numerator 25, denominator 2
> [ 778.095812] esd_402_pci 0000:05:00.0: ESDACC with CAN-FD feature detected. This driver doesn't support CAN-FD yet.
> [ 778.095822] esd_402_pci 0000:05:00.0: DMA alloc failed!
> [ 778.095882] esd_402_pci: probe of 0000:05:00.0 failed with error -12

Looking at the back trace, at least to a kernel developer, it's clear
that this is DMA allocation failure.

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-01-28 09:12    [W:0.053 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site