lkml.org 
[lkml]   [2022]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
From
Date
On 27/01/2022 14:05, Lutz Koschorreck wrote:
> The interrupt pin of the external ethernet phy is used, instead of the
> enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in
> the gpio_ao bank.
>
> This causes phy interrupt problems at system startup.
> [ 76.645190] irq 36: nobody cared (try booting with the "irqpoll" option)
> [ 76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2
> [ 76.649629] Hardware name: Hardkernel ODROID-HC4 (DT)
> [ 76.649635] Call trace:
> [ 76.649638] dump_backtrace+0x0/0x1c8
> [ 76.649658] show_stack+0x14/0x60
> [ 76.649667] dump_stack_lvl+0x64/0x7c
> [ 76.649676] dump_stack+0x14/0x2c
> [ 76.649683] __report_bad_irq+0x38/0xe8
> [ 76.649695] note_interrupt+0x220/0x3a0
> [ 76.649704] handle_irq_event_percpu+0x58/0x88
> [ 76.649713] handle_irq_event+0x44/0xd8
> [ 76.649721] handle_fasteoi_irq+0xa8/0x130
> [ 76.649730] generic_handle_domain_irq+0x38/0x58
> [ 76.649738] gic_handle_irq+0x9c/0xb8
> [ 76.649747] call_on_irq_stack+0x28/0x38
> [ 76.649755] do_interrupt_handler+0x7c/0x80
> [ 76.649763] el1_interrupt+0x34/0x80
> [ 76.649772] el1h_64_irq_handler+0x14/0x20
> [ 76.649781] el1h_64_irq+0x74/0x78
> [ 76.649788] irq_finalize_oneshot.part.56+0x68/0xf8
> [ 76.649796] irq_thread_fn+0x5c/0x98
> [ 76.649804] irq_thread+0x13c/0x260
> [ 76.649812] kthread+0x144/0x178
> [ 76.649822] ret_from_fork+0x10/0x20
> [ 76.649830] handlers:
> [ 76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt
> [ 76.661256] Disabling IRQ #36
>
> Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")
>
> Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de>
>
> only gpio bank

Spurious lines, will remove while applying

> ---
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index 0bd1e98a0eef..ed7cd5f53046 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
> regulator-max-microvolt = <3300000>;
> vin-supply = <&vcc_5v>;
>
> - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
> + enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> regulator-always-on;
>
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2022-01-27 14:10    [W:0.065 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site