lkml.org 
[lkml]   [2022]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] cpufreq: qcom-hw: Delay enabling throttle_irq
Date
In the event that the SoC is under thermal pressure while booting it's
possible for the dcvs notification to happen inbetween the cpufreq
framework calling init and it actually updating the policy's
related_cpus cpumask.

Prior to the introduction of the thermal pressure update helper an empty
cpumask would simply result in the thermal pressure of no cpus being
updated, but the new code will attempt to dereference an invalid per_cpu
variable.

Avoid this problem by using the newly reintroduced "ready" callback, to
postpone enabling the IRQ until the related_cpus cpumask is filled in.

Fixes: 0258cb19c77d ("cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- Switched back to applying thermal pressure on "related_cpus", as
"policy->cpus" is adjusted based on CPU hotplug.
- Reintroduced "ready" callback (in patch 1), as the maintainers of
topology_update_thermal_pressure() where not interested in allowing a cpumask
of 0.

drivers/cpufreq/qcom-cpufreq-hw.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 05f3d7876e44..effbb680b453 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -388,7 +388,7 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)

snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu);
ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq,
- IRQF_ONESHOT, data->irq_name, data);
+ IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data);
if (ret) {
dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret);
return 0;
@@ -542,6 +542,14 @@ static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
return 0;
}

+static void qcom_cpufreq_ready(struct cpufreq_policy *policy)
+{
+ struct qcom_cpufreq_data *data = policy->driver_data;
+
+ if (data->throttle_irq >= 0)
+ enable_irq(data->throttle_irq);
+}
+
static struct freq_attr *qcom_cpufreq_hw_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
&cpufreq_freq_attr_scaling_boost_freqs,
@@ -561,6 +569,7 @@ static struct cpufreq_driver cpufreq_qcom_hw_driver = {
.fast_switch = qcom_cpufreq_hw_fast_switch,
.name = "qcom-cpufreq-hw",
.attr = qcom_cpufreq_hw_attr,
+ .ready = qcom_cpufreq_ready,
};

static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
--
2.33.1
\
 
 \ /
  Last update: 2022-01-28 04:26    [W:0.196 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site