lkml.org 
[lkml]   [2022]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v2] ACPI: device_sysfs: Add sysfs support for _PLD
From
When ACPI table includes _PLD fields for a device, create a new file
(pld) in sysfs to share _PLD fields.

Signed-off-by: Won Chung <wonchung@google.com>
---
Documentation/ABI/testing/sysfs-bus-acpi | 53 ++++++++++++++++++++++++
drivers/acpi/device_sysfs.c | 42 +++++++++++++++++++
2 files changed, 95 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi
index 58abacf59b2a..7f4544c9d563 100644
--- a/Documentation/ABI/testing/sysfs-bus-acpi
+++ b/Documentation/ABI/testing/sysfs-bus-acpi
@@ -96,3 +96,56 @@ Description:
hardware, if the _HRV control method is present. It is mostly
useful for non-PCI devices because lspci can list the hardware
version for PCI devices.
+
+What: /sys/bus/acpi/devices/.../pld
+Date: Jan, 2022
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+ This attribute contains the output of the device object's
+ _PLD control method, if present. This information provides
+ details on physical location of a port.
+
+ Description on each _PLD field from ACPI specification:
+
+ =============== ============================================
+ GROUP_TOKEN Unique numerical value identifying a group.
+ GROUP_POSITION Identifies this device connection point’s
+ position in the group.
+ USER_VISIBLE Set if the device connection point can be
+ seen by the user without disassembly.
+ DOCK Set if the device connection point resides
+ in a docking station or port replicator.
+ BAY Set if describing a device in a bay or if
+ device connection point is a bay.
+ LID Set if this device connection point resides
+ on the lid of laptop system.
+ PANEL Describes which panel surface of the system’s
+ housing the device connection point resides on:
+ 0 - Top
+ 1 - Bottom
+ 2 - Left
+ 3 - Right
+ 4 - Front
+ 5 - Back
+ 6 - Unknown (Vertical Position and Horizontal
+ Position will be ignored)
+ HORIZONTAL_ 0 - Left
+ POSITION 1 - Center
+ 2 - Right
+ VERTICAL_ 0 - Upper
+ POSITION 1 - Center
+ 2 - Lower
+ SHAPE Describes the shape of the device connection
+ point.
+ 0 - Round
+ 1 - Oval
+ 2 - Square
+ 3 - Vertical Rectangle
+ 4 - Horizontal Rectangle
+ 5 - Vertical Trapezoid
+ 6 - Horizontal Trapezoid
+ 7 - Unknown - Shape rendered as a Rectangle
+ with dotted lines
+ 8 - Chamfered
+ 15:9 - Reserved
+ =============== ===============================================
diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c
index d5d6403ba07b..8d4df5fb1c45 100644
--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -509,6 +509,40 @@ static ssize_t status_show(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_RO(status);

+static ssize_t pld_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ acpi_status status;
+ struct acpi_pld_info *pld;
+
+ status = acpi_get_physical_device_location(acpi_dev->handle, &pld);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return sprintf(buf, "GROUP_TOKEN=%u\n"
+ "GROUP_POSITION=%u\n"
+ "USER_VISIBLE=%u\n"
+ "DOCK=%u\n"
+ "BAY=%u\n"
+ "LID=%u\n"
+ "PANEL=%u\n"
+ "HORIZONTAL_POSITION=%u\n"
+ "VERTICAL_POSITION=%u\n"
+ "SHAPE=%u\n",
+ pld->group_token,
+ pld->group_position,
+ pld->user_visible,
+ pld->dock,
+ pld->bay,
+ pld->lid,
+ pld->panel,
+ pld->horizontal_position,
+ pld->vertical_position,
+ pld->shape);
+}
+static DEVICE_ATTR_RO(pld);
+
/**
* acpi_device_setup_files - Create sysfs attributes of an ACPI device.
* @dev: ACPI device object.
@@ -595,6 +629,12 @@ int acpi_device_setup_files(struct acpi_device *dev)
&dev_attr_real_power_state);
}

+ if (acpi_has_method(dev->handle, "_PLD")) {
+ result = device_create_file(&dev->dev, &dev_attr_pld);
+ if (result)
+ goto end;
+ }
+
acpi_expose_nondev_subnodes(&dev->dev.kobj, &dev->data);

end:
@@ -645,4 +685,6 @@ void acpi_device_remove_files(struct acpi_device *dev)
device_remove_file(&dev->dev, &dev_attr_status);
if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
+ if (acpi_has_method(dev->handle, "_PLD"))
+ device_remove_file(&dev->dev, &dev_attr_pld);
}
--
2.35.0.rc0.227.g00780c9af4-goog
\
 
 \ /
  Last update: 2022-01-28 03:05    [W:0.037 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site