lkml.org 
[lkml]   [2022]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v16 2/4] dmaengine: tegra: Add tegra gpcdma driver
From
27.01.2022 19:29, Akhil R пишет:
>> 23.01.2022 19:49, Akhil R пишет:
>>>> 21.01.2022 19:24, Akhil R пишет:
>>>>>>>>>>> +static int tegra_dma_terminate_all(struct dma_chan *dc) {
>>>>>>>>>>> + struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
>>>>>>>>>>> + unsigned long flags;
>>>>>>>>>>> + LIST_HEAD(head);
>>>>>>>>>>> + int err;
>>>>>>>>>>> +
>>>>>>>>>>> + if (tdc->dma_desc) {
>>>>>>>>>>
>>>>>>>>>> Needs locking protection against racing with the interrupt handler.
>>>>>>>>> tegra_dma_stop_client() waits for the in-flight transfer to
>>>>>>>>> complete and prevents any additional transfer to start.
>>>>>>>>> Wouldn't it manage the race? Do you see any potential issue there?
>>>>>>>>
>>>>>>>> You should consider interrupt handler like a process running in a
>>>>>>>> parallel thread. The interrupt handler sets tdc->dma_desc to NULL,
>>>>>>>> hence you'll get NULL dereference in tegra_dma_stop_client().
>>>>>>>
>>>>>>> Is it better if I remove the below part from tegra_dma_stop_client()
>>>>>>> so that dma_desc is not accessed at all?
>>>>>>>
>>>>>>> + wcount = tdc_read(tdc, TEGRA_GPCDMA_CHAN_XFER_COUNT);
>>>>>>> + tdc->dma_desc->bytes_transferred +=
>>>>>>> + tdc->dma_desc->bytes_requested - (wcount * 4);
>>>>>>>
>>>>>>> Because I don't see a point in updating the value there. dma_desc is
>>>>>>> set to NULL in the next step in terminate_all() anyway.
>>>>>>
>>>>>> That isn't going help you much because you also can't release DMA
>>>>>> descriptor while interrupt handler still may be running and using
>>>>>> that descriptor.
>>>>>
>>>>> Does the below functions look good to resolve the issue, provided
>>>>> tegra_dma_stop_client() doesn't access dma_desc?
>>>>
>>>> Stop shall not race with the start.
>>>>
>>>>> +static int tegra_dma_terminate_all(struct dma_chan *dc) {
>>>>> + struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
>>>>> + unsigned long flags;
>>>>> + LIST_HEAD(head);
>>>>> + int err;
>>>>> +
>>>>> + err = tegra_dma_stop_client(tdc);
>>>>> + if (err)
>>>>> + return err;
>>>>> +
>>>>> + tegra_dma_stop(tdc);
>>>>> +
>>>>> + spin_lock_irqsave(&tdc->vc.lock, flags);
>>>>> + tegra_dma_sid_free(tdc);
>>>>> + tdc->dma_desc = NULL;
>>>>> +
>>>>> + vchan_get_all_descriptors(&tdc->vc, &head);
>>>>> + spin_unlock_irqrestore(&tdc->vc.lock, flags);
>>>>> +
>>>>> + vchan_dma_desc_free_list(&tdc->vc, &head);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>>
>>>>> +static irqreturn_t tegra_dma_isr(int irq, void *dev_id) {
>>>>> + struct tegra_dma_channel *tdc = dev_id;
>>>>> + struct tegra_dma_desc *dma_desc = tdc->dma_desc;
>>>>> + struct tegra_dma_sg_req *sg_req;
>>>>> + u32 status;
>>>>> +
>>>>> + /* Check channel error status register */
>>>>> + status = tdc_read(tdc, TEGRA_GPCDMA_CHAN_ERR_STATUS);
>>>>> + if (status) {
>>>>> + tegra_dma_chan_decode_error(tdc, status);
>>>>> + tegra_dma_dump_chan_regs(tdc);
>>>>> + tdc_write(tdc, TEGRA_GPCDMA_CHAN_ERR_STATUS, 0xFFFFFFFF);
>>>>> + }
>>>>> +
>>>>> + status = tdc_read(tdc, TEGRA_GPCDMA_CHAN_STATUS);
>>>>> + if (!(status & TEGRA_GPCDMA_STATUS_ISE_EOC))
>>>>> + return IRQ_HANDLED;
>>>>> +
>>>>> + tdc_write(tdc, TEGRA_GPCDMA_CHAN_STATUS,
>>>>> + TEGRA_GPCDMA_STATUS_ISE_EOC);
>>>>> +
>>>>> + spin_lock(&tdc->vc.lock);
>>>>> + if (!dma_desc)
>>>> All checks and assignments must be done inside of critical section.
>>>
>>> Okay. So, the lock should be held throughout the function.
>>> Do you think tegra_dma_pause should also hold a lock
>>> and remove irq_synchronize? That function also writes
>>> to CSR register.
>>
>> Interrupt handler shall not unpause channel in a case of race condition,
>> it should handle completed transfer and check whether channel is paused
>> before issuing next transfer.
>> So yes, pause also needs a lock.
> Thanks for the points. I collected more details on this scenario and found that
> DMA can only be paused if there is an in-flight transfer (i.e no interrupt will be
> pending). And there cannot be an interrupt after DMA is paused. Hence, there
> is no case of ISR unpausing a paused transfer. So, I guess, the check or a lock
> might not be required there.

If there is in-flight transfer, then interrupt may fire at any time. All
CSRE modifications must be protected.

> One thing I am thinking of is to wait for DMA to be busy so that it can be paused.
> I would add these changes and send out a new patch.

You should assume that interrupt handler may run with a delay. Then
pause() will see that channel isn't busy, but delayed interrupt will
start the next transfer.

Also, the tegra_dma_pause() will crash if tdc->dma_desc=NULL.

Everything must be done under lock.

\
 
 \ /
  Last update: 2022-01-28 00:16    [W:0.075 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site