lkml.org 
[lkml]   [2022]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] drivers: thermal: clear all mitigation when thermal zone is disabled
Date
Whenever a thermal zone is in trip violated state, there is a chance
that the same thermal zone mode can be disabled either via
thermal core API or via thermal zone sysfs. Once it is disabled,
the framework bails out any re-evaluation of thermal zone. It leads
to a case where if it is already in mitigation state, it will stay
the same state forever.

To avoid above mentioned issue, add support to bind/unbind
governor from thermal zone during thermal zone mode change request
and clear all existing throttling in governor unbind_from_tz()
callback.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
---
drivers/thermal/gov_power_allocator.c | 3 +++
drivers/thermal/gov_step_wise.c | 26 ++++++++++++++++++++++++++
drivers/thermal/thermal_core.c | 31 +++++++++++++++++++++++++++----
3 files changed, 56 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 13e3757..9ff0c5f 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -696,6 +696,9 @@ static void power_allocator_unbind(struct thermal_zone_device *tz)

dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);

+ tz->passive = 0;
+ allow_maximum_power(tz, true);
+
if (params->allocated_tzp) {
kfree(tz->tzp);
tz->tzp = NULL;
diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
index 12acb12..2d2186b 100644
--- a/drivers/thermal/gov_step_wise.c
+++ b/drivers/thermal/gov_step_wise.c
@@ -168,6 +168,31 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
}

/**
+ * step_wise_unbind() - unbind the step_wise governor to a thermal zone
+ * @tz: thermal zone to unbind it to
+ *
+ * Clear all previous throttling and reset passive counter.
+ *
+ */
+static void step_wise_unbind(struct thermal_zone_device *tz)
+{
+ struct thermal_instance *instance;
+
+ dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
+
+ mutex_lock(&tz->lock);
+ tz->passive = 0;
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+ instance->initialized = false;
+ instance->target = THERMAL_NO_TARGET;
+ mutex_lock(&instance->cdev->lock);
+ __thermal_cdev_update(instance->cdev);
+ mutex_unlock(&instance->cdev->lock);
+ }
+ mutex_unlock(&tz->lock);
+}
+
+/**
* step_wise_throttle - throttles devices associated with the given zone
* @tz: thermal_zone_device
* @trip: trip point index
@@ -196,6 +221,7 @@ static int step_wise_throttle(struct thermal_zone_device *tz, int trip)

static struct thermal_governor thermal_gov_step_wise = {
.name = "step_wise",
+ .unbind_from_tz = step_wise_unbind,
.throttle = step_wise_throttle,
};
THERMAL_GOVERNOR_DECLARE(thermal_gov_step_wise);
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 82654dc..34726d3 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -274,6 +274,26 @@ static int __init thermal_register_governors(void)
return ret;
}

+static void thermal_governor_attach(struct thermal_zone_device *tz)
+{
+ mutex_lock(&thermal_governor_lock);
+ if (tz->governor && tz->governor->bind_to_tz) {
+ if (tz->governor->bind_to_tz(tz))
+ dev_err(&tz->device,
+ "governor %s failed to bind to thermal zone %s\n",
+ tz->governor->name, tz->type);
+ }
+ mutex_unlock(&thermal_governor_lock);
+}
+
+static void thermal_governor_detach(struct thermal_zone_device *tz)
+{
+ mutex_lock(&thermal_governor_lock);
+ if (tz->governor && tz->governor->unbind_from_tz)
+ tz->governor->unbind_from_tz(tz);
+ mutex_unlock(&thermal_governor_lock);
+}
+
/*
* Zone update section: main control loop applied to each zone while monitoring
*
@@ -449,12 +469,15 @@ static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,

mutex_unlock(&tz->lock);

- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
- if (mode == THERMAL_DEVICE_ENABLED)
+ if (mode == THERMAL_DEVICE_ENABLED) {
+ thermal_governor_attach(tz);
+ thermal_zone_device_init(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
thermal_notify_tz_enable(tz->id);
- else
+ } else {
+ thermal_governor_detach(tz);
thermal_notify_tz_disable(tz->id);
+ }

return ret;
}
\
 
 \ /
  Last update: 2022-01-27 19:13    [W:0.335 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site