lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] i2c: designware: Add AMD PSP I2C bus support
Date
[Public]

> >
> > >>>>
> > >>>> Through here seems to all be generic code for accessing
> > >>>> the AMD PSP. To me this seems like something which belongs
> > >>>> in a separate AMD-PSP-mbox driver/lib, which can then be
> > >>>> shared between other kernel drivers which may also want
> > >>>> to access PSP.
> > >>>
> > >>> I see your point clearly and actually it is not an accident that I've
> > >>> put all PSP-mailbox methods in one "block". They are logically
> > >>> different than the rest of i2c-adapter specific methods.
> > >>>
> > >>> That being said, above PSP mailbox was created by AMD solely for the
> > >>> purpose of i2c_arbitration. It has its own set of commands and
> > >>> specific format of the command-response buffer. Thus it is not and it
> > >>> won't be generic in the future. There are already upstreamed drivers
> > >>> from AMD (under drivers/crypto/ccp/) which made use of PSP, however
> > >>> their channel of communication looks completely different than the
> > >>> very simple i2c_arbitration model implemented above.
> > >>>
> > >
> > > Can you please double confirm no other users for this mailbox and it's for
> > > you only? And if so is it only specific to this platform that no other users?
> > > At least on some UEFI AMD platforms that mailbox is defined for
> > > communication with something else. We might need some way to attest
> > > from the firmware that it's safe to use.
> > >
> > > The only mailbox that is defined for OS use across different silicon AFAIK is
> > > the GPU driver mailbox. It may be safer to use that, but I'm not sure if
> > > GPU driver has come up early enough for your use.
> >
> > The CCP/PSP driver will load as a PCIe device driver on this platform and
> > will ioremap the MMIO space. Today, that driver doesn't reference those
> > mailbox registers, and I don't know that there will be a need in the
> > future. But if there is a need in the future, you could end up with a
> > conflict between these two drivers.
>
> Right, so I have confirmed this with AMD PSP firmware developers, that
> this particular x86-PSP mailbox is created and will be reserved
> _solely_ for the purpose of i2c arbitration (and thus this driver).
> There is no intend to use it elsewhere or share with another users.

I've learned never to say never. People move on to different roles and history
gets lost. As it's exclusive to this use case of I2C arbitration it will probably still
be useful to leave in the comments nearby for our future selves what model/family
SOC this was introduced in case the number of mailboxes are extinguished some
day and this ends up being needed for a secondary purpose for some future SOC.

>
> > Thanks,
> > Tom
> >
> > >
> > >>> Because of this I'm treating this as an i2c_semaphore-related code and
> > >>> putting this in this module. In my opinion moving this into some
> > >>> separate driver (which will be actually used only here) makes code
> > >>> less clear. But let's also hear some voice from AMD.
> > >>
> > >> Since as you say this mailbox is special and only for i2c-arbitration,
> > >> keeping it inside this patch / .c file is fine.
> > >>
> > >>>
> > >>>>
> > >>>> Sorta like the generic iosf_mbi_read() and
> > >>>> iosf_mbi_write() functions from:
> > >>>>
> > >>>> arch/x86/platform/intel/iosf_mbi.c
> > >>>>
> > >>>> used on the Intel chips, which are also used outside of
> > >>>> the I2C bus-locking code.
> > >>>>
> > >>>> This is also one of the reasons why I think it would be
> > >>>> good to get some AMD folks involved in this, since they
> > >>>> may be aware of other drivers which also need to access
> > >>>> the PSP mbox.
> > >>>>
> > >>>
> > >>> Right, I'm adding mario.limonciello@amd.com to the CC, so that he can
> > >> comment.
> > >>>
> > >>> (...)
> > >>>
> > >>>>> +/*
> > >>>>> + * Locking methods are based on the default implementation from
> > >>>>> + * drivers/i2c/i2c-core.base.c, but with psp acquire and release
> operations
> > >>>>> + * added. With this in place we can ensure that i2c clients on the bus
> shared
> > >>>>> + * with psp are able to lock HW access to the bus for arbitrary number
> of
> > >>>>> + * operations - that is e.g. write-wait-read.
> > >>>>> + */
> > >>>>> +static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
> > >>>>> + unsigned int flags)
> > >>>>> +{
> > >>>>> + psp_acquire_i2c_bus();
> > >>>>> + rt_mutex_lock_nested(&adapter->bus_lock,
> > >> i2c_adapter_depth(adapter));
> > >>>>
> > >>>> This does not do what you think it does and you will still deadlock
> > >>>> when things nest because of someone taking the bus-lock and then
> > >>>> the main i2c-designware transfer function calling the acquire_lock
> > >>>> callback.
> > >>>
> > >>> I haven't used rt_mutex_lock_nested() with the intent to prevent me
> > >>> from deadlock when i2c-designware calls acquire_lock with bus-lock
> > >>> already taken. This is a method copied from
> > >>> drivers/i2c/i2c-core-base.c (BTW, I have a typo in above comment).
> > >>> This is the default implementation applied by i2c-core when particular
> > >>> adapter doesn't register its own locking callbacks - thus it is called
> > >>> for i2c-designware for all platforms.
> > >>>
> > >>> In case of this driver internal i2c-designware acquire_lock() is equal
> > >>> to psp_acquire_i2c_bus(). In other words, bus-level lock
> > >>> i2c_adapter_dw_psp_lock_bus() is a superset of internal adapter's
> > >>> acquire_lock().
> > >>
> > >> Ah I missed that this is just mimicking the core functions +
> > >> an extra call to psp_acquire_i2c_bus().
> > >>
> > >> I assumed that the dwc->acquire callback path was also taking
> > >> the mutex and I thought you had fallen for the _nested meaning
> > >> something different then it does, my bad.
> > >>
> > >>> In order to prevent deadlock which you are talking about, I'm using
> > >>> reference lock counter inside psp_acquire_i2c_bus() thus it is safe to
> > >>> invoke acquire_lock() when bus-lock is already taken.
> > >>
> > >> Ah good, that is pretty much is the same as what the Bay Trail code
> > >> is doing.
> > >>
> > >>>
> > >>>>
> > >>>> The _nested postfix is only for the lockdep lock-debugger, this
> > >>>> actually turns into a regular mutex_lock when lockdep is not enabled:
> > >>>>
> > >>>> #ifdef CONFIG_DEBUG_LOCK_ALLOC
> > >>>> extern void rt_mutex_lock_nested(struct rt_mutex *lock, unsigned int
> > >> subclass);
> > >>>> #define rt_mutex_lock(lock) rt_mutex_lock_nested(lock, 0)
> > >>>> #else
> > >>>> extern void rt_mutex_lock(struct rt_mutex *lock);
> > >>>> #define rt_mutex_lock_nested(lock, subclass) rt_mutex_lock(lock)
> > >>>> #endif
> > >>>>
> > >>>> The _nested postfix as such is only to tell the lockdep code that
> > >>>> even though it seems we are trying to take the same mutex twice
> > >>>> since in both cases it is of i2c_adapter.rt_mutex "lock class"
> > >>>> that we are sure it is never the same i2c_adapter (but rather
> > >>>> one which always gets called in a nested fashion from another
> > >>>> i2c_adapter).
> > >>>>
> > >>>> IOW this only disables a false-positive lockdep warning, it does
> > >>>> not allow taking the same mutex twice, you will still hang on
> > >>>> the second mutex_lock call on the same lock.
> > >>>
> > >>> Thanks for the technical background about rt_mutex_lock_nested. I
> > >>> think we should keep using it as is, since as I wrote above I don't
> > >>> have any reasoning to modify it here.
> > >>
> > >> Ack, now that my misreading of the code has been cleared up
> > >> I agree.
> > >>
> > >>>> Also I don't think you are allowed to use the bus_locking code
> > >>>> like this. The i2c bus-locking code is intended to deal with
> > >>>> busses which have muxes in them, where the mux must be set
> > >>>> to the right branch of the bus to reach the client and then
> > >>>> not be changed during the transfer to that client.
> > >>>>
> > >>>> So i2c-client drivers are never supposed to directly call
> > >>>> the bus-locking functions.
> > >>>
> > >>> I think you are not correct here. There are examples of i2c-clients
> > >>> which are using i2c bus_locking for the purpose of locking adapter for
> > >>> the bunch of i2c transactions.
> > >>>
> > >>> As an example let's take drivers/char/tpm/tpm_tis_i2c_cr50.c. It
> > >>> operates in write-wait-read model and there is i2c_lock_bus() call
> > >>> used to ensure that bus won't be released -
> > >>>
> > >>
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.c
> %2F&data=04%7C01%7CMario.Limonciello%40amd.com%7Cf8cd037a72b
> 749fb003408d9df3f5ced%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0
> %7C637786285501955886%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw
> MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata
> =s4N9vTWbuRUww0qvsRz16fV%2Fnj41SxyLOB%2BjGFjyOaA%3D&reserved
> =0
> > >>
> om%2Ftorvalds%2Flinux%2Fblob%2Fmaster%2Fdrivers%2Fchar%2Ftpm%2Ftpm_
> > >>
> tis_i2c_cr50.c%23L202&data=04%7C01%7Cmario.limonciello%40amd.com
> > >>
> %7C1bdc742bc2a24f59b7d908d9dcc95438%7C3dd8961fe4884e608e11a82d994
> > >>
> e183d%7C0%7C0%7C637783579554955840%7CUnknown%7CTWFpbGZsb3d8ey
> > >>
> JWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C
> > >>
> 3000&sdata=fr0UEka%2BxYyPxqUG6oOZo%2Bc6pWgto2mD7hWA20YulVQ
> > >> %3D&reserved=0.
> > >>>
> > >>> Similar model is followed in drivers/char/tpm/tpm_i2c_infineon.c and
> > >>> couple of other i2c-client drivers.
> > >>
> > >> Ah I see, interesting (live and learn).
> > >>
> > >> But this is then combined with using the special __i2c_transfer()
> > >> function for the actual i2c reads/writes, since using the regular
> > >> i2c_transfer() function after already taking the lock would deadlock.
> > >>
> > >> There is a similar unlocked raw __i2c_smbus_xfer(), but as the
> > >> comment in include/linux/i2c.h above the locked i2c_smbus_xfer() says:
> > >>
> > >> /* This is the very generalized SMBus access routine. You probably do not
> > >> want to use this, though; one of the functions below may be much easier,
> > >> and probably just as fast.
> > >> Note that we use i2c_adapter here, because you do not need a specific
> > >> smbus adapter to call this function. */
> > >> s32 i2c_smbus_xfer(...);
> > >>
> > >> So in this case a driver cannot use the usual
> > >> i2c_smbus_read_byte/word/byte_data/word_data() helpers and
> > >> the same for writes. Also using an i2c_regmap (which is used
> > >> in a ton of places like PMIC drivers) will not work this way.
> > >>
> > >> So yes you can use i2c_bus_lock() for this; but only if all the
> > >> drivers where you want to do that limit themselves to
> > >> __i2c_transfer() and __i2c_smbus_xfer() calls and/or are
> > >> rewritten to only use those.
> > >>>> This is why in the Bay Trail case we have i2c-drivers
> > >>>> directly calling iosf_mbi_block_punit_i2c_access() and
> > >>>> iosf_mbi_unblock_punit_i2c_access() to lock the bus
> > >>>> for multiple i2c-transfers. We can get away with this there
> > >>>> because the bus in question is only used to access the
> > >>>> PMIC and that PMIC is only used on Bay Trail (and CHT)
> > >>>> boards, so the PMIC drivers can just hard-code these
> > >>>> calls.
> > >>>>
> > >>>> If you need to take the PSP I2C semaphore for multiple
> > >>>> transfers in some generic drivers, then I guess that the
> > >>>> i2c-subsys will need to get some new i2c_adapter callbacks
> > >>>> to acquire / release the bus for i2c-controllers where
> > >>>> the bus/controller is shared with some co-processor like
> > >>>> in the PSP case.
> > >>>
> > >>> This is exactly my intention to support generic i2c-clients drivers
> > >>> without them being aware that i2c-adapter above is using some
> > >>> semaphore/arbitration. Hopefully you can agree with me that currently
> > >>> available bus_locking can be used and is enough for this purpose.
> > >>
> > >> It can be used, but with limitations, see above.
> > >>
> > >>>
> > >>>> Also note that iosf_mbi_block_punit_i2c_access() and
> > >>>> iosf_mbi_unblock_punit_i2c_access() do their own
> > >>>> ref/lock-counting to allow calling them multiple times and
> > >>>> the first block call takes the bus and the last unblock
> > >>>> call releases it.
> > >>>
> > >>> This is exactly what I was talking about above and also implemented
> > >>> within psp_acquire_i2c_bus() and psp_release_i2c_bus().
> > >>
> > >> Right, I was to quick in skimming over your code when
> > >> I wrote down my concerns about there being a deadlock
> > >> there, sorry.
> > >>
> > >> Regards,
> > >>
> > >> Hans

\
 
 \ /
  Last update: 2022-01-26 20:37    [W:0.096 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site