lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/7] clk: starfive: jh7100: Don't round divisor up twice
Date
The problem is best illustrated by an example. Suppose a consumer wants
a 4MHz clock rate from a divider with a 10MHz parent. It would then
call

clk_round_rate(clk, 4000000)

which would call into our determine_rate() callback that correctly
rounds up and finds that a divisor of 3 gives the highest possible
frequency below the requested 4MHz and returns 10000000 / 3 = 3333333Hz.

However the consumer would then call

clk_set_rate(clk, 3333333)

but since 3333333 doesn't divide 10000000 evenly our set_rate() callback
would again round the divisor up and set it to 4 which results in an
unnecessarily low rate of 2.5MHz.

Fix it by using DIV_ROUND_CLOSEST in the set_rate() callback.

Fixes: 4210be668a09 ("clk: starfive: Add JH7100 clock generator driver")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
drivers/clk/starfive/clk-starfive-jh7100.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index 25d31afa0f87..db6a4dc203af 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -399,22 +399,13 @@ static unsigned long jh7100_clk_recalc_rate(struct clk_hw *hw,
return div ? parent_rate / div : 0;
}

-static unsigned long jh7100_clk_bestdiv(struct jh7100_clk *clk,
- unsigned long rate, unsigned long parent)
-{
- unsigned long max = clk->max_div;
- unsigned long div = DIV_ROUND_UP(parent, rate);
-
- return min(div, max);
-}
-
static int jh7100_clk_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct jh7100_clk *clk = jh7100_clk_from(hw);
unsigned long parent = req->best_parent_rate;
unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
- unsigned long div = jh7100_clk_bestdiv(clk, rate, parent);
+ unsigned long div = min_t(unsigned long, DIV_ROUND_UP(parent, rate), clk->max_div);
unsigned long result = parent / div;

/*
@@ -442,7 +433,8 @@ static int jh7100_clk_set_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct jh7100_clk *clk = jh7100_clk_from(hw);
- unsigned long div = jh7100_clk_bestdiv(clk, rate, parent_rate);
+ unsigned long div = clamp(DIV_ROUND_CLOSEST(parent_rate, rate),
+ 1UL, (unsigned long)clk->max_div);

jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, div);
return 0;
--
2.34.1
\
 
 \ /
  Last update: 2022-01-26 18:41    [W:0.135 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site