lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: renesas: ulcb-kf: add 9-asix sensor device
Hi Nikita,

On Wed, Jan 12, 2022 at 9:52 PM Nikita Yushchenko
<nikita.yoush@cogentembedded.com> wrote:
> This adds nodes for lsm9ds0 sensor installed on the KF board.
>
> With this patch, the sensor data becomes available over iio sysfs
> interface.
>
> Interrupt definition is not added yet, because the interrupt lines of
> lsm9ds0 are pulled to VCC on the board, which implies need for
> active-low configuration. But st_sensors drivers currently can't work
> with active-low interrupts on this chip.
>
> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>

Forgot something...

> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -66,6 +66,13 @@ hdmi_3v3: regulator-hdmi-3v3 {
> regulator-max-microvolt = <3300000>;
> };
>
> + accel_3v3: regulator-acc-3v3 {

Please move up, to preserve sort order.

> + compatible = "regulator-fixed";
> + regulator-name = "accel-3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> hdmi1-out {
> compatible = "hdmi-connector";
> type = "a";
> @@ -208,6 +215,22 @@ pcm3168a_endpoint_c: endpoint {
> };
> };
> };
> +
> + lsm9ds0_acc_mag@1d {

Please move up, to preserve sort order.

> + compatible = "st,lsm9ds0-imu";
> + reg = <0x1d>;
> +
> + vdd-supply = <&accel_3v3>;
> + vddio-supply = <&accel_3v3>;
> + };

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2022-01-26 16:05    [W:0.123 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site