lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] arm64/mm: avoid fixmap race condition when create pud mapping
On Wed, 26 Jan 2022 at 11:09, Jianyong Wu <Jianyong.Wu@arm.com> wrote:
>
> Hi Ard,
>
> > -----Original Message-----
> > From: Ard Biesheuvel <ardb@kernel.org>
> > Sent: Wednesday, January 26, 2022 4:37 PM
> > To: Justin He <Justin.He@arm.com>
> > Cc: Catalin Marinas <Catalin.Marinas@arm.com>; Jianyong Wu
> > <Jianyong.Wu@arm.com>; will@kernel.org; Anshuman Khandual
> > <Anshuman.Khandual@arm.com>; akpm@linux-foundation.org;
> > david@redhat.com; quic_qiancai@quicinc.com; linux-
> > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > gshan@redhat.com; nd <nd@arm.com>
> > Subject: Re: [PATCH v3] arm64/mm: avoid fixmap race condition when create
> > pud mapping
> >
> > On Wed, 26 Jan 2022 at 05:21, Justin He <Justin.He@arm.com> wrote:
> > >
> > > Hi Catalin
> > >
> > > > -----Original Message-----
> > > > From: Catalin Marinas <catalin.marinas@arm.com>
> > > > Sent: Friday, January 7, 2022 6:43 PM
> > > > To: Jianyong Wu <Jianyong.Wu@arm.com>
> > > > Cc: will@kernel.org; Anshuman Khandual
> > <Anshuman.Khandual@arm.com>;
> > > > akpm@linux-foundation.org; david@redhat.com;
> > > > quic_qiancai@quicinc.com; ardb@kernel.org;
> > > > linux-kernel@vger.kernel.org; linux-arm- kernel@lists.infradead.org;
> > > > gshan@redhat.com; Justin He <Justin.He@arm.com>; nd <nd@arm.com>
> > > > Subject: Re: [PATCH v3] arm64/mm: avoid fixmap race condition when
> > > > create pud mapping
> > > >
> > > > On Fri, Jan 07, 2022 at 09:10:57AM +0000, Jianyong Wu wrote:
> > > > > Hi Catalin,
> > > > >
> > > > > I roughly find the root cause.
> > > > > alloc_init_pud will be called at the very beginning of kernel
> > > > > boot in
> > > > create_mapping_noalloc where no memory allocator is initialized. But
> > > > lockdep check may need allocate memory. So, kernel take exception
> > > > when acquire lock.(I have not found the exact code that cause this
> > > > issue) that's say we may not be able to use a lock so early.
> > > > >
> > > > > I come up with 2 methods to address it.
> > > > > 1) skip dead lock check at the very beginning of kernel boot in
> > > > > lockdep
> > > > code.
> > > > > 2) provided 2 two versions of __create_pgd_mapping, one with lock
> > > > > in it and the other without. There may be no possible of race for
> > > > > memory mapping at the very beginning time of kernel boot, thus we
> > > > > can use the no lock version of __create_pgd_mapping safely.
> > > > > In my test, this issue is gone if there is no lock held in
> > > > > create_mapping_noalloc. I think create_mapping_noalloc is called
> > > > > early enough to avoid the race conditions of memory mapping,
> > > > > however, I have not proved it.
> > > >
> > > > I think method 2 would work better but rather than implementing new
> > > > nolock functions I'd add a NO_LOCK flag and check it in
> > > > alloc_init_pud() before mutex_lock/unlock. Also add a comment when
> > > > passing the NO_LOCK flag on why it's needed and why there wouldn't
> > > > be any races at that stage (early boot etc.)
> > > >
> > > The problematic code path is:
> > > __primary_switched
> > > early_fdt_map->fixmap_remap_fdt
> > > create_mapping_noalloc->alloc_init_pud
> > > mutex_lock (with Jianyong's patch)
> > >
> > > The problem seems to be that we will clear BSS segment twice if kaslr
> > > is enabled. Hence, some of the static variables in lockdep init
> > > process were messed up. That is to said, with kaslr enabled we might
> > > initialize lockdep twice if we add mutex_lock/unlock in alloc_init_pud().
> > >
> >
> > Thanks for tracking that down.
> >
> > Note that clearing the BSS twice is not the root problem here. The root
> > problem is that we set global state while the kernel runs at the default link
> > time address, and then refer to it again after the entire kernel has been
> > shifted in the kernel VA space. Such global state could consist of mutable
> > pointers to statically allocated data (which would be reset to their default
> > values after the relocation code runs again), or global pointer variables in BSS.
> > In either case, relying on such a global variable after the second relocation
> > performed by KASLR would be risky, and so we should avoid manipulating
> > global state at all if it might involve pointer to statically allocated data
> > structures.
> >
> > > In other ways, if we invoke mutex_lock/unlock in such a early booting stage.
> > > It might be unsafe because lockdep inserts lock_acquire/release as the
> > > complex hooks.
> > >
> > > In summary, would it better if Jianyong splits these early boot and
> > > late boot case? e.g. introduce a nolock version for
> > create_mapping_noalloc().
> > >
> > > What do you think of it?
> > >
> >
> > The pre-KASLR case definitely doesn't need a lock. But given that
> > create_mapping_noalloc() is only used to map the FDT, which happens very
> > early one way or the other, wouldn't it be better to move the lock/unlock
> > into other callers of __create_pgd_mapping()? (and make sure no other
> > users of the fixmap slots exist)
>
> There are server callers of __create_pgd_mapping. I think some of them need no fixmap lock as they are called so early. I figure out all of them here:
> create_mapping_noalloc: no lock
> create_pgd_mapping: no lock
> __map_memblock: no lock
> map_kernel_segment: no lock
> map_entry_trampoline: no lock
> update_mapping_prot: need lock
> arch_add_memory: need lock
>
> WDYT?
>

That seems reasonable, but it needs to be documented clearly in the code.

\
 
 \ /
  Last update: 2022-01-26 11:13    [W:0.075 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site