lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state
Date
Commit 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in
hint") enables ACS, and some platforms lose its NVMe after resume from
S3:
[ 50.947816] pcieport 0000:00:1b.0: DPC: containment event, status:0x1f01 source:0x0000
[ 50.947817] pcieport 0000:00:1b.0: DPC: unmasked uncorrectable error detected
[ 50.947829] pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID)
[ 50.947830] pcieport 0000:00:1b.0: device [8086:06ac] error status/mask=00200000/00010000
[ 50.947831] pcieport 0000:00:1b.0: [21] ACSViol (First)
[ 50.947841] pcieport 0000:00:1b.0: AER: broadcast error_detected message
[ 50.947843] nvme nvme0: frozen state error detected, reset controller

It happens right after ACS gets enabled during resume.

There's another case, when Thunderbolt reaches D3cold:
[ 30.100211] pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
[ 30.100251] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[ 30.100256] pcieport 0000:00:1d.0: device [8086:7ab0] error status/mask=00100000/00004000
[ 30.100262] pcieport 0000:00:1d.0: [20] UnsupReq (First)
[ 30.100267] pcieport 0000:00:1d.0: AER: TLP Header: 34000000 08000052 00000000 00000000
[ 30.100372] thunderbolt 0000:0a:00.0: AER: can't recover (no error_detected callback)
[ 30.100401] xhci_hcd 0000:3e:00.0: AER: can't recover (no error_detected callback)
[ 30.100427] pcieport 0000:00:1d.0: AER: device recovery failed

So disable AER service to avoid the noises from turning power rails
on/off when the device is in low power states (D3hot and D3cold), as
PCIe spec "5.2 Link State Power Management" states that TLP and DLLP
transmission is disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold
with aux power) and L3 (D3cold).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215453
Fixes: 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in hint")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v2:
- Wording change.

drivers/pci/pcie/aer.c | 31 +++++++++++++++++++++++++------
1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9fa1f97e5b270..e4e9d4a3098d7 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1367,6 +1367,22 @@ static int aer_probe(struct pcie_device *dev)
return 0;
}

+static int aer_suspend(struct pcie_device *dev)
+{
+ struct aer_rpc *rpc = get_service_data(dev);
+
+ aer_disable_rootport(rpc);
+ return 0;
+}
+
+static int aer_resume(struct pcie_device *dev)
+{
+ struct aer_rpc *rpc = get_service_data(dev);
+
+ aer_enable_rootport(rpc);
+ return 0;
+}
+
/**
* aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
* @dev: pointer to Root Port, RCEC, or RCiEP
@@ -1433,12 +1449,15 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
}

static struct pcie_port_service_driver aerdriver = {
- .name = "aer",
- .port_type = PCIE_ANY_PORT,
- .service = PCIE_PORT_SERVICE_AER,
-
- .probe = aer_probe,
- .remove = aer_remove,
+ .name = "aer",
+ .port_type = PCIE_ANY_PORT,
+ .service = PCIE_PORT_SERVICE_AER,
+ .probe = aer_probe,
+ .suspend = aer_suspend,
+ .resume = aer_resume,
+ .runtime_suspend = aer_suspend,
+ .runtime_resume = aer_resume,
+ .remove = aer_remove,
};

/**
--
2.33.1
\
 
 \ /
  Last update: 2022-01-27 03:55    [W:0.330 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site