lkml.org 
[lkml]   [2022]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] usb: raw-gadget: fix handling of dual-direction-capable endpoints
On Wed, Jan 26, 2022 at 11:31 PM Jann Horn <jannh@google.com> wrote:
>
> On Wed, Jan 26, 2022 at 11:12 PM Andrey Konovalov <andreyknvl@gmail.com> wrote:
> > On Wed, Jan 26, 2022 at 9:52 PM Jann Horn <jannh@google.com> wrote:
> > >
> > > Under dummy_hcd, every available endpoint is *either* IN or OUT capable.
> > > But with some real hardware, there are endpoints that support both IN and
> > > OUT. In particular, the PLX 2380 has four available endpoints that each
> > > support both IN and OUT.
> > >
> > > raw-gadget currently gets confused and thinks that any endpoint that is
> > > usable as an IN endpoint can never be used as an OUT endpoint.
> > >
> > > Fix it by looking at the direction in the configured endpoint descriptor
> > > instead of looking at the hardware capabilities.
> > >
> > > With this change, I can use the PLX 2380 with raw-gadget.
> > >
> > > Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
> > > Signed-off-by: Jann Horn <jannh@google.com>
> > > ---
> > > drivers/usb/gadget/legacy/raw_gadget.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
> > > index c5a2c734234a..d86c3a36441e 100644
> > > --- a/drivers/usb/gadget/legacy/raw_gadget.c
> > > +++ b/drivers/usb/gadget/legacy/raw_gadget.c
> > > @@ -1004,7 +1004,7 @@ static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io,
> > > ret = -EBUSY;
> > > goto out_unlock;
> > > }
> > > - if ((in && !ep->ep->caps.dir_in) || (!in && ep->ep->caps.dir_in)) {
> > > + if (in != usb_endpoint_dir_in(ep->ep->desc)) {
> > > dev_dbg(&dev->gadget->dev, "fail, wrong direction\n");
> > > ret = -EINVAL;
> > > goto out_unlock;
> > >
> > > base-commit: 0280e3c58f92b2fe0e8fbbdf8d386449168de4a8
> > > --
> > > 2.35.0.rc0.227.g00780c9af4-goog
> > >
> >
> > Awesome! Thanks for finding this!
> >
> > What do you think about using
> >
> > if ((in && !ep->ep->caps.dir_in) || (!in && !ep->ep->caps.dir_out))
> >
> > instead?
> >
> > It looks less cryptic: if (in and no in caps) or (out and no out caps) => fail.
>
> That's also semantically different, right?
> As I understand it, what we should be checking here is whether the
> direction of the request matches the direction previously specified in
> USB_RAW_IOCTL_EP_ENABLE, not whether the hardware would be capable of
> using the endpoint in the requested direction if it had been
> configured for that direction?
> But I might also be misunderstanding what's going on - it's not like
> I've looked at a spec for this or anything like that, I'm just kinda
> guessing...

Ah, yes, you are right. We already checked caps via
usb_gadget_ep_match_desc() in EP_ENABLE. So here it makes sense to
check that the request direction matches the one in the descriptor.

Your original patch makes sense.

Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>

Thanks!

\
 
 \ /
  Last update: 2022-01-26 23:38    [W:0.114 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site